Clamp on Tester for measuring AC/DC current, AC voltage and resistance,
**with a maximum aperture of 18 mm (.7 in)**
The Clamp on Tester PCE-DC 2 has been designed to detect, indirectly, AC/DC current and ohms. The Clamp on Tester has white LEDs integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact. The reduced dimensions of this Clamp on Tester allow for measurements to be taken in places with limited access. The backlight display ensures that it is easy to read, even in places with limited light available, such as electrical cabinets or in cabling ducts. Testing voltage without contact helps when detecting dangerous power lines, and it allows makes it easier to detect the location of cuts in power lines.
Highlights
- LCD with 3 2/3 positions, backlit, clamp for continuous current
- Measures AC/DC current, AC voltage and ohms
- Memory function, zero reset for the DCA, test voltage without contact
- Illumination of the point of measurement
- Automatic range selection
- Auto shut-off
- Aperture of the clamp: 18 mm / .7 in
Technical specifications
- Direct voltage DC — Measuring range: 0 … 600 mV
- Direct voltage DC — Resolution: 0,1 mV
- Direct voltage DC — Accuracy: ±(1.0 % +2 digits)
- Direct current DC — Measuring range: 0 … 200 A
- Direct current DC — Resolution: 0,1 A
- Direct current DC — Accuracy: ±(2.0% +5 digits)
- AC voltage — Measuring range: 0 … 600 V
- AC voltage — Resolution: 0,1 V
- AC voltage — Accuracy: ±(1.5 % +8 digits)
- AC voltage — Frequency: range 50 … 60 Hz
- Alternating current AC — Measuring range: 0 … 200 A
- Alternating current AC — Resolution: 0,1 A
- Alternating current AC — Accuracy: ±(2.5 % +8 digits)
- Alternating current AC — Frequency: range 50 … 60 Hz
- Resistance — Measuring range: 0 … 999,9 Ω
- Resistance — Resolution: 0,1 Ω
- Resistance — Accuracy: ±(1.5 % +8 digits)
- General technical data — Measuring functions: MIN, MAX, HOLD
- General technical data — Display type: LCD with backlight
- General technical data — Display size: 1,4 Inch
- General technical data: Measuring rate 10 Hz
- General technical data: Maximum cable diameter 18 mm
- General technical data: Automatic power-off 10 min
- General technical data: Safety standard CAT III 600V, CAT IV 300V
- General technical data: Test current<0.5 mA
- General technical data — Menu language: English, English (GB)
- General technical data — Protection class (device): IP20
- General technical data — (Rechargeable) battery: 2 x 1,5 V AAA battery , Alkali-manganese
- General technical data — Capacity: 1200 mAh
- General technical data — Operating conditions: -10 … 50 °C , 0 … 75 % RH
- General technical data — Storage conditions: -30 … 60 °C , 0 … 75 % RH
- General technical data — Dimensions: ( L x W x H )164 x 65 x 32 mm
- General technical data — Weight: 175 g
Delivery scope
- 1 x Clamp on Tester PCE-DC2
- 2 x Measurement cables
- 1 x Bag
- 2 x Batteries
- 1 x User’s manual
