Clamp on Tester for measuring AC current, AC voltage, DC current and frequency
**(3 in 1) / Maximum aperture of clamps is 18 mm (.7 in)**
The Clamp on Tester has been designed to detect, indirectly, AC/DC current and frequency. The Clamp on Tester has one LED integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact. The reduced dimensions of this device allow for measurements to be taken in places with limited access. The backlight display ensures that it is easy to read, even in places with limited light available, such as electrical cabinets or in cabling ducts. Testing voltage without contact helps when detecting dangerous power lines, and it makes it easier to detect the location of cuts in power lines.
Highlights
- LCD with 3 2/3 positions, backlit, clamp for continuous current
- Measures AC/DC current, AC voltage and frequency
- Memory function, zero reset for the DCA, test voltage without contact
- Integrated flashlight
- Automatic range selection
- Auto shut-off
- Aperture of the clamp: 18 mm / .7 in
Technical specifications
- Direct current DC — Measuring range: 0 … 200 A
- Direct current DC — Resolution: 0,1 A
- Direct current DC — Accuracy: ±(2.8% of reading +8 digits)
- Alternating current AC — Measuring range: 0 … 200 A
- Alternating current AC — Resolution: 0,1 A
- Alternating current AC — Accuracy: ±(3 % of Rd +8 digits)
- Frequency — Measuring range: 40 … 50 Hz
- Frequency — Resolution: 0,01 Hz
- Frequency — Accuracy: ±(1.2 % +5 digits)
- Frequency — Measuring range: 51 … 510 Hz
- Frequency — Resolution: 0,1 Hz
- Frequency — Accuracy: ±(1.2% +3 Digits)
- Frequency — Measuring range: 0,51 … 1 kHz
- Frequency — Resolution: 0,001 kHz
- Frequency — Accuracy: ±(1.2% +3 Digits)
- General technical data — Measuring functions: HOLD
- General technical data — Display type: LCD with backlight
- General technical data — Display size: 1,4 Inch
- General technical data: Standard(s)EN 61010-1, EN 61010-2-032
- General technical data: Maximum cable diameter 18 mm
- General technical data: Automatic power-off 7 min
- General technical data — Housing: PVC
- General technical data: Safety standard CAT II / 600V
- General technical data — Menu language: English, English (GB)
- General technical data — Protection class (device): IP20
- General technical data — (Rechargeable) battery: 2 x 1,5 V AAA battery , Alkali-manganese
- General technical data — Capacity: 1200 mAh
- General technical data — Operating conditions: 0 … 30 °C , 0 … 90 % RH
- General technical data — Storage conditions: 0 … 30 °C , 0 … 90 % RH
- General technical data — Dimensions: ( L x W x H )155 x 66 x 31 mm
- General technical data — Weight: 155 g
Delivery scope
- 1 x PCE-DC1 Clamp Meter
- 1 x Bag
- 2 x Batteries
- 1 x User’s manual
