Digital Multimeter with 1 m (3.3 ft) cable / measurement range ±99.9 mA DC / manual zero point /
battery life of approx. 40 hours / automatic power off / clamp opening Ø 5 mm /
accuracy of ±0.3 % of rdg./ optional ISO calibration certificate
The digital multimeter has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the digital multimeter is a particularly accurate measuring instrument. In order to conveniently perform measurements with the digital multimeter, the digital multimeter itself is connected to a 1 meter / 3.3 ft cable. The digital multimeter can thus be attached to the cable to be measured. The digital multimeter can be conveniently placed aside at the workplace. This leaves both hands free while reading the measured values, for example to carry out adjustments or configurations on the process technology. Due to the high accuracy and the external sensor, the digital multimeter is ideally suited to make quick and reliable current measurements when process signals are involved.
In order to carry out a current measurement, the digital multimeter of the digital multimeter must be clamped around the cable to be checked. This allows the digital multimeter to measure the flowing current inductively. This has the particular advantage that a current measurement can be carried out during operation with the digital multimeter.
For improved visibility, the digital multimeter is equipped with an LED. With the LED of the digital multimeter, the measuring spot can be ideally illuminated. Optionally, the digital multimeter can be delivered with an ISO calibration certificate.
If you have any further questions about the PCE-MCM 10 digital multimeter, please take a look at the following technical data or use our contact form. Our technicians and engineers will be happy to advise you on the digital multimeter or any other products in the fields of control, laboratory or measuring technology or scales and balances from PCE Instruments.
Highlights
- Detachable process clamp meter with 1 m / 3.3 ft cable
- Clamp opening of 5 mm diameter
- Measurement range ±99.9 mA DC
- Display with backlight
- Operating time of approx. 40 hours
- optional ISO-calibration certificate
Technical specifications
- Direct current DC — Measuring range: 0 … 20,99 mA
- Direct current DC — Resolution: 0,01 mA
- Direct current DC — Accuracy: ±0.3% of VAT +8 digits
- Direct current DC — Measuring range: 21 … 99,9 mA
- Direct current DC — Resolution: 0,1 mA
- Direct current DC — Accuracy: ±1% of VAT +8 digits
- General technical data: Cable length 1 m
- General technical data — Display type: LCD
- General technical data: Operating time 40 h
- General technical data: Automatic power-off 10 min
- General technical data: Safety standard CAT II / 300V
- General technical data — Menu language: English, English (GB)
- General technical data — Protection class (device): IP40
- General technical data — (Rechargeable) battery: 2 x 1,5 V AA battery , Alkali-manganese
- General technical data — Capacity: 3000 mAh
- General technical data — Operating conditions: -10 … 50 °C , 0 … 75 % RH
- General technical data — Storage conditions: -15 … 60 °C , 0 … 75 % RH
- General technical data — Dimensions: ( L x W x H )180 x 55 x 39 mm
- General technical data — Weight: 220 g
Delivery scope
- 1 x Digital Multimeter PCE-MCM 10
- 2 x 3V via 2 AA batteries
- 1 x Instruction manual
