Profilometer with large graphic OLED display / rechargeable battery Storage of up to 20 measurement processes / extensive number of parameters / micro-USB interface for charging the battery and reading out the memory
The portable and easy-to-use profilometer with its large OLED display is particularly suitable for quick and precise measurements in the workshop or laboratory. This roughness meter uses a DSP chip for control and data processing at high speed and with low energy consumption. In addition, you have a large selection of measurement parameters for the roughness measuring device: Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc, Rmax, Ry (JIS), Rz (JIS), RP (ASME), Rpm (ASME ), Rv (ASME), R3z, R3zmax, Rz1max, Rmr (c), Rdc, Rmr.
The measurements are automatically stored in the internal memory of the roughness meter. The stored data can then be transferred to a PC via the micro-USB interface on the roughness measuring device and analyzed using the software. It is also possible to have the data displayed on the OLED display of the roughness measuring device after a measurement. Even the wave course can be shown on the display of the roughness meter.
It often happens that the contact surface of the test piece is too small for a roughness measuring device to position the roughness measuring device appropriately for a measurement. For such cases, a positioning adapter is included with this roughness measuring device. Thus, the roughness measuring device also enables measurements on small samples.
Highlights
- Selection of 21 parameters
- Large graphic OLED display
- Fast and accurate measurement
- 3 different cut-off wavelengths
- Micro-USB interface for PC connection
- Storage of 20 measurement curves
Technical specifications
- Roughness value Ra, Rq, Rc — Measuring range: 0,005 … 16 µm
- Roughness value Ra, Rq, Rc — Resolution: 0,001 µm
- Roughness value Ra, Rq, Rc — Accuracy: <±10 %
- Roughness: Roughness value Rz, Rt, Rp, Rv, Rmax, Ry(JIS), Rz(JIS), Rp(ASME), Rpm(ASME), Rv(ASME), R3z, R3zmax, Rz1max, Rdc
- Roughness — Measuring range: 0,02 … 200 µm
- Roughness — Resolution: 0,01 µm
- Roughness — Accuracy: <±10 %
- Roughness value Rsm — Measuring range: 5 … 1000 µm
- Roughness value Rsm — Accuracy: <±10 %
- Roughness value Rsk — Measuring range: -1 … +1
- Roughness value Rmr(c), Rmr — Measuring range: 0 … 100 %
- Roughness value Rmr(c), Rmr — Accuracy: <±10 %
- General technical data: Repeat accuracy<6 %
- General technical data — Measuring functions: Ra, Rz, Rq, Rt, Rsm, Rsk, Rp, Rv, Rc
- General technical data — Measuring functions: (additional information)Rmax, Ry(JIS), Rz(JIS), RP(ASME), Rpm(ASME), Rv(ASME), R3z, R3zmax, Rz1max, Rmr(c), Rdc, Rmr
- Units µm, μinch — Display type: OLED
- Storage medium Internal memory — Storage capacity: 20 Values
- Storage medium Internal memory — Interface: Micro-USB
- Storage medium Internal memory: Standard(s)ANSIB46.1/ASMEB46.1, DIN EN ISO 4287, ASMEB46.1
- Storage medium Internal memory — Sensor: inductive
- Storage medium Internal memory: Automatic power-off from…to 1 … 30 min.
- Storage medium Internal memory: Cut-off wavelength 0.25 mm / 0.8 mm / 2.5 mm
- Storage medium Internal memory: Key- Probe tip radius – 5 µm – Probe tip material – diamond, angled at 90° – Probing speed: 0.135 mm/s at: 0.25 mm 0.5 mm/s at: 0.8 mm 1 mm/s at: 2.5 mm
- Storage medium Internal memory: Maximum traverse distance 15 mm
- Storage medium Internal memory — Menu language: English, English (GB)
- Storage medium Internal memory — Protection class (device): IP31
- Storage medium Internal memory — Power supply: 3.7 V
- Connector type Device-europlug — (Rechargeable) battery: 1 x 3,7 V internal , Lithium-ion polymer battery
- Connector type Device-europlug — Capacity: 1500 mAh
- Connector type Device-europlug — Operating conditions: 0 … 50 °C , 10 … 90 % RH
- Connector type Device-europlug — Storage conditions: 0 … 50 °C , 10 … 90 % RH
- Connector type Device-europlug — Dimensions: ( L x W x H )150 x 60 x 43 mm
- Connector type Device-europlug — Weight: 370 g
Delivery scope
- 1 x Profilometer PCE-RT 2200
- 1 x Micro probe
- 1 x Protective cap for probe
- 1 x Positioning device
- 1 x Calibration plate
- 1 x Roughness standard
- 1 x USB cable
- 1 x Charging adapter
- 1 x Carrying case
- 1 x Instruction manual
