Digital Multimeter DCA zero point function / AC/DC current measurement up to 80 A / Automatic range selection / Clamp opening: 18 mm / 0.7″
This digital multimeter was developed for the indirect measurement of AC/DC currents with high resolution. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this clamp meter. The small dimensions of this amperage clamp enable it to be used in places that are difficult to access.
The large, illuminated display of these measuring clamps ensures very good readability even in dark locations, such as in switch cabinets and cable ducts. The non-contact voltage tester function not only supports you in the detection of dangerous voltage potentials, but also gives you a precise tool for determining cable break positions in cable reels, extension cables and appliance connection cables.
Highlights
- 4-digit LCD display with backlight
- AC/DC current measurement up to 80 amps
- Save function
- DCA zero adjustment
- Current tester
- Integrated flashlight
- Automatic range selection
- Jaw opening of 18 mm / 0.7 in
Technical specifications
- Direct current DC — Measuring range: 0 … 2 A
- Direct current DC — Resolution: 0,001 A
- Direct current DC — Accuracy: ±(3.0% +10 digits)
- Direct current DC — Measuring range: 0 … 80 A
- Direct current DC — Resolution: 0,1 A
- Direct current DC — Accuracy: ±(3.0% +8 Digits)
- Alternating current AC — Measuring range: 0 … 2 A
- Alternating current AC — Resolution: 0,001 A
- Alternating current AC — Accuracy: ±(2.8% +10 digits)
- Alternating current AC — Measuring range: 0 … 80 A
- Alternating current AC — Resolution: 0,1 A
- Alternating current AC — Accuracy: ±(3.0% +8 Digits)
- General technical data — Display type: LCD with backlight
- General technical data — Display size: 1,4 Inch
- General technical data: Measuring rate 2 x per second
- General technical data: Standard(s)EN 61010-1, EN 61010-2-032
- General technical data: Maximum cable diameter 18 mm
- General technical data: Automatic power-off 7 min
- General technical data: Safety standard CAT II / 600V
- General technical data — Menu language: English, English (GB)
- General technical data — Protection class (device): IP20
- General technical data — (Rechargeable) battery: 2 x 1,5 V AAA battery , Alkali-manganese
- General technical data — Capacity: 1200 mAh
- General technical data — Operating conditions: 0 … 50 °C , 0 … 90 % RH
- General technical data — Storage conditions: -30 … 60 °C , 0 … 90 % RH
- General technical data — Dimensions: ( L x W x H )164 x 65 x 32 mm
- General technical data — Weight: 175 g
Delivery scope
- 1 x PCE-DC3 Digital Multimeter
- 1 x Case
- 2 x Batteries
- 1 x User manual
