PCE-PHC 10 Water analysis meter2-point pH controller / Measures pH and regulates pH / 3-point calibration / For fish farming, electroplating or water treatment
The pH process controller PCE-PHC 10 measures and regulates the pH of various substances and is able to influence the pH value. The pH process controller is a classic 2-point controller, depending on the application, the controller can be used to influence the liquid in the direction of alkaline or acidic. The limit values for the 2-point control are programmed via the buttons of the pH controller, which are located on the front. Also in the front is the LED display, on which the current measured value can be read at any time. This facilitates the fast and precise control of the water values, especially in the industrial process.
A pH electrode is connected to the pH controller via BNC plug. The screw connections can be used to connect a temperature probe for automatic temperature compensation to the pH process controller. The pH controller finds its application in electroplating, the control of fresh and wastewater or in the wastewater neutralization. Due to the compact dimensions, the pH controller fits in every control panel.
Highlights
- Small dimensions
- Large LED display
- 2 control relays for pH and temperature
- Connection via BNC and screw contacts
- For water treatment, electroplating …
- 3-point calibration
Technical specifications
- pH — Measuring range: 0 … 14 pH
- pH — Resolution: 0,01 pH
- pH — Accuracy: ±(0.02 pH +2 digits)
- General technical data — Outputs Closing relay: 250V AC / 0.5: 24V DC / 0.5 A Voltage output: 12V / 0.05 A DC
- General technical data: Temperature compensation- Manual: -30 to 100°C / −22 to 212°F – Automatic: 0 to 65°C / 32 to 149°F
- General technical data — Display type: LED
- General technical data: Digit size [WxH]H: 14 mm
- General technical data — Interface: RS232
- General technical data: Number of calibration points 3
- General technical data — Calibration: Automatic calibration point recognition with pH buffer solutions 4.00 / 7.00 / 10.00
- General technical data: Measuring interval 1 s
- General technical data: Input impedance 1 TΩ
- General technical data — Protection class (device): IP20
- General technical data — Power supply 90 … 260V AC: 50/60 Hz
- General technical data — Operating conditions: 0 … 50 °C , 0 … 80 % RH
- General technical data — Storage conditions: 0 … 50 °C , 0 … 80 % RH
- General technical data — Dimensions: ( L x W x H )96 x 48 x 107 mm
- General technical data — Weight: 275 g
Delivery scope
- 1 x Water Analysis Meter / pH Tester PCE-PHC 10
- 1 x User manual
