Tensile Tester with external measuring cell up to 50 kN / various alarm modes / graphic display / data logger / incl. software / incl. eyebolts
The Tensile Tester can be used to measure both tensile and compressive forces with high accuracy. Tensile and compressive forces are often measured in the test laboratory. For example, to determine the yield point, the tear-off force or the force required to actuate buttons or switches. The Tensile Tester is supplied with an external measuring cell and can measure forces of up to 50 kN. Various eyelets or hooks with an M20 thread can be attached to the measuring cells. It is also possible to attach your own devices to the measuring cell using these threads.
The internal memory of 32 GB offers space for 30 million measuring points. This allows measurement logs to be created, saved and exported. The Tensile Tester has a USB-C interface that can be used to read the measurement data into the PC software. The Tensile Tester is equipped with a graphic LCD that displays the measured values both numerically and graphically. In addition, a bar chart shows the measured value in the selected measuring range. The measuring cell is protected to IP67 and can therefore also be used in harsh industrial environments.
Various force test stands are available for adapting the Tensile Tester. A special feature of the Tensile Tester is the possibility of exchanging the measuring cell between the models. By entering the sensitivity in mV/V, all measuring cells can be used with just one handheld device.
Highlights
- Measuring range: 0 … 50 kN
- Measuring rate: 1 … 7200 Hz
- Accuracy: ±0.05 % F.S.
- Graphic display
- USB-C interface
- PC software
- 32 GB memory for 30 mio. measuring points
- Measuring cells can be easily changed
- Various alarm modes
- Bar chart for displaying the measured value in the measuring range
- Calibration reminder
Technical specifications
Force Measuring range 0 … 50 kN Resolution 5 N Accuracy±0.05% FS General technical data Units kPa, kg, g, ft, N, lb, T, kn, Pa, Nm, Ncm Display type LCD with backlight Display size 2,8 Inch Adjustable measuring rate 1 … 7200 Hz Storage medium Internal memory Storage capacity 32 GB Storage interval from 1 Hz Storage interval to 7200 Hz Interface USB-C Operating time 13 h Automatic power-off from…to 1 … 15 min. Alarm optical, Acoustic Alarm modes Within, beyond, fracture, off Protection class measuring cell IP67 Menu language Turkish, English, Polish, Spanish, German, Chinese, Russian, Japanese, French, Danish, Italian, Dutch, Portuguese Protection class (device)IP52 Power supply USB 5 V DC, 500 mA (Rechargeable) battery 1 x 7,4 V DST604665 , Lithium polymer battery Capacity 2200 mAh Performance 16,28 Wh Operating conditions-20 … 65 °C , 10 … 95 % RH Storage conditions-20 … 65 °C , 10 … 95 % RH Dimensions ( L x W x H )165 x 85 x 32 mm Weight 255 g
Delivery scope
1 x Force Gage PCE-DFG 50K X 1 x load cell PCE-DFG 50K X load cell 1 x case 1 x USB-C cable 1 x PC software 1 x operating instructions
