BE60 Digital RMS Multimeter with Integrated Thermal Imager
Professional multimeter for thermographic measurements
The BE60, a true RMS multimeter equipped with a wide range of features, including an integrated infrared thermal imager and an LED light, is an indispensable tool for troubleshooting electrical equipment and installations. The thermal imaging multimeter measures heat generation in electronic components and instantly detects overheated components such as transistors, fuses, cables, or switches. This allows you to quickly identify the sources of faults and replace components to prevent further damage or even cable fires.
With eleven different functions for the most common measurable quantities, this durable ammeter covers a wide range of potential applications in retail, DIY, hobbies, and the automotive industry. Whether it’s measuring home and construction equipment, professional electrical work, occasional repairs to household and electronic devices, or vehicle electronics issues—the BE60 impresses even under the most challenging outdoor conditions with its wide range of functions and features. Wherever electricity flows and there is a risk of temperature-related hazards, this thermal imaging multimeter offers valuable troubleshooting and preventive maintenance capabilities.
Well-equipped for almost all current, voltage, power, and thermographic measurements
The BE60 can be used to measure heat generation and temperature, DC and AC voltage, DC and AC current, capacitance, frequency/duty cycle measurements, resistance measurements, diode tests, and acoustic continuity tests.
A truly durable and powerful RMS multimeter
Measured values and thermal images are clearly displayed on a 2.4-inch TFT color screen. Thanks to the convenient hold function, measured values can still be read on the screen even after the measurement is complete. During a continuity test, an audible signal alerts you to a short circuit or a closed circuit, allowing you to work more efficiently since you don’t have to keep your eyes on the screen while measuring. The device’s automatic shut-off (Auto-Power-Off) after 15 minutes of inactivity is battery-friendly and practical.
Assessment and Logging, Including the MultiMeasure Mobile App
As a latest-generation true RMS digital multimeter, the BE60 is 100 percent “MultiMeasure Mobile-ready” and is therefore equipped to meet all professional requirements for evaluating and documenting measurement data. Integrated Bluetooth® viainterface, recorded measurement data is easily and conveniently transferred to a smartphone or tablet for professional evaluation and logging using the free MultiMeasure mobile app (Android and iOS). The BE60’s cost-effective combination of an integrated thermal imager and professional MultiMeasure Mobile evaluation software provides fast and reliable data on electrical measurements and problematic overheating at any time, including various analysis options such as a logging function for long-term measurements, graphical evaluations, a reporting function, and data synchronization with our professional MultiMeasure software via the cloud.
Equipment, Scope of Delivery, and Technical Specifications
The BE60 digital multimeter complies with measurement categories CAT III 600 V / CAT IV 300 V for safe operation in building installations (stationary loads with non-plug connections, distribution connections, and devices permanently installed in distribution equipment). In addition to its particularly durable, impact-resistant plastic housing, the BE60 features impressive IP40 dust protection, which features double insulation for the measuring instrument and measuring leads in accordance with insulation protection class II. Optimal conditions for safe and reliable measurement even under harsh conditions.
LC screen: 2.4-inch TFT color display
LCD display: 4 digits (maximum display: 3999)
Dimensions: 150 x 46 x 70 mm
Weight: 285 g
Thermal imaging camera
Screen size: 2.4-inch color TFT screen
Detector resolution: 80 x 80 pixels
Temperature range: -20 °C to 260 °C
IFOV: 4.53 mrad Image
frequency: 50 Hz
Spectral range: 8–14 µm
DC Voltage (V/DC)
Measurement range: 0.4 to 600 V
Accuracy at 400 mV: ±(0.8% + 8 digits)
Accuracy for 4 V/40 V: ±(0.5% + 5 digits)
Accuracy at 400 V/600 V: ±(0.8% + 5 digits)
Alternating current (V/AC, 50 / 60 Hz)
Measurement range: 4 to 600 V
Accuracy for 4 V/40 V/400 V/600 V: ±(1.0% + 5 digits)
Alternating current (V/AC+, 61 Hz / 1 kHz)
Measurement range: 4 to 600 V
Accuracy for 4 V/40 V/400 V/600 V: ±(2.5% + 5 digits)
Direct Current (DC)
Measurement range: 400 μA to 10 A
Accuracy at 400 μA/4000 μA/40 mA: ±(1.5% + 5 digits)
Accuracy at 400 mA: ±(1.5% + 8 digits)
Accuracy: 1 ±0 A (2.0% + 8 digits)
Alternating Current (A/AC)
Measurement range: 400 μA to 10 A
Accuracy at 400 μA/4000 μA: ±(2.0% + x 5 digits)
Accuracy at 40 mA/400 mA: ±(2.0% + 5 cycles × 10 digits)
accuracy ±(2.5% + x 5 digits)
Capacitance
Measurement range: 40 nF to 4000 μF
Accuracy at 40 nF: ±(3.0% + 20 digits)
Accuracy at 400 nF: ±(3.0% + 8 digits)
Accuracy: 4 µF/40 μF/40%, +8 digits)
Accuracy for 4000 μF: ±(3.5% + 20 digits)
Resistance (ohms)
Measurement range: 400 Ω to 40 MΩ
Accuracy at 400 Ω: ±(1.0% + 10 digits)
Accuracy 4 kΩ/40 kΩ/400 kΩ/4 MΩ: ±(1.0% + 5 digits)
Accuracy: 40 MΩ (2.5% + 5 × 10 digits)
Frequency measurement range
: 40 Hz – 10 MHz
Accuracy (AC) 40 Hz – 10 kHz: ±(0.5%)
Accuracy (electrical circuits) 40 Hz – 10 MHz: ±(0.2% + 5 digits)
Temperature
Measurement range: -20 °C to 260 °C
Accuracy: (±3.0% / ±3 °C)
Duty Cycle Measurement Range
: 10% to 90%
Accuracy: ±(1.2% + 2 digits)
Built-in flashlight function
Scope of delivery:
- BE60 Digital Multimeter
- Li-Ion battery, 3.7 V, 1,400 mAh
- Safety lines with test probes (2x)
- Micro USB cable
- transport case
- user manual
The Difference Between Standard Measuring Instruments and Those with True RMS Capability
A digital measuring instrument without an actual RMS function assumes that the measured AC signal is sinusoidal and uses this assumption to convert the measured raw signal for display. In reality, however, the current waveform is never purely sinusoidal; devices such as switching power supplies, speed or power controllers, etc., introduce disturbances that in turn cause distorted current waveforms. Since these are no longer purely sinusoidal, they cannot be measured accurately without the True RMS function.
True RMS measuring instruments are capable of accurately measuring even non-sinusoidal signal curves and are therefore capable of directly determining the true effective value of any variable. “Root Mean Square” (RMS) refers to the accurate determination and output of the true effective value.
MultiMeasure mobile app – smart measurement data collection and analysis
With the free MultiMeasure mobile app, stored measurement data becomes even more transparent. Just like the MultiMeasure Studio Professional 2.0 analysis software developed by Trotec for cross-device management, analysis, and reporting of measurement data on a computer, the MultiMeasure Mobile app—available for free on Android and iOSdevices, which is available for free, enables professional measurement data management with a wide range of useful features. The app automatically detects the BE60 handheld measuring device and numerous other Bluetooth ® measuring devices, and they can be quickly and easily connected wirelessly to a mobile device.
The functionality of the MultiMeasure mobile app goes beyond simply displaying stored measurement values. All stored data can be displayed either numerically or as a graphical chart, and can also be saved as a series of measurements using the logging feature for long-term analysis. Even assigning measurement data to different projects (e.g., departments, rooms, buildings, etc.) is a breeze with the customer-supported app—including text and report templates for professional measurement data reports.
Advantages:
- Digital multifunctional measuring device with eleven measurement functions
- 4-digit LCD display (maximum display: 3999)
- Extremely durable and effective
- Automatic Range Selection
- CAT III 600V / CAT IV 300V
- Measurement of direct and alternating current up to 10 A
- Measurement of DC and AC voltage up to 600 V
- True RMS function: accurate measurement by directly determining the true effective value
- resistance measurement
- Continuity Test and Diode Test
- Measurement of Frequency, Capacitance, and Duty Cycle
- storage function
- Temperature Measurement with an Integrated Thermal Camera
- Impact-resistant housing
- Integrated LED lamp for optimal lighting of the work area
- Dust-proof – protection class IP40
- Class II insulation protection for the meter and measuring leads
- Compatible with the MultiMeasure mobile app (Bluetooth)
- 2.4-inch TFT color screen
- automatic shut-off
MultiMeasure Mobile – all the app’s benefits at a glance:
- Automatic detection of the BE60 and other measuring devices via Bluetooth ® interface
- Fast and intuitive navigation
- Displaying the measured value numerically or as a chart/matrix
- Integrated reporting feature for on-site documentation
- Function of the Measurement Data and Documentation Manager
- Customer management is already integrated
- Various analysis options available directly within the app
- Storage space for measurements related to photos
- Matrix measurements, including those using a photoliner
- Full data synchronization with MultiMeasure Professional via the cloud
