Water analysis meterPCE-PH 30 pH, conductivity, redox tester with interchangeable sensors / Easy-to-read LC display / Pen pH meter / Automatic temperature compensation
The pH tester PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable pH tester is used to control pH and conductivity. It also serves for simultaneous temperature measurement. Furthermore, the pH tester can be used to measure the redox potential.
A three-point calibration and automatic temperature compensation up to 90°C/ 194°F guarantee high accuracy even with fluctuating measuring temperatures. The pH tester has a readable display. The test device is supplied with pH and temperature probe, calibration and storage fluid. The redox probe is available separately as an accessory.
Highlights
- 6 in 1 pH tester
- IP57 housing
- Automatic temperature compensation
- Battery operation
- 3 point pH calibration
- Exchangeable electrodes
- Max-Min Hold function
- Automatic electrode detection
Technical specifications
- Conductivity — Measuring range: 0 … 2000 µS
- Conductivity — Resolution: 1 µS
- Conductivity — Accuracy: ±2% FS
- pH — Measuring range: -2 … +16 pH
- pH — Resolution: 0,01 pH
- pH — Accuracy: ±0.01 pH +1 digit
- Redox — Measuring range: -1000 … +1000 mV
- Redox — Resolution: 1 mV
- Redox — Accuracy: ±2 mV +1 digit
- Salinity — Measuring range: 0 … 1000 ppm
- Salinity — Resolution: 1 ppm
- Salinity — Accuracy: ±2% FS
- TDS — Measuring range: 0 … 1300 ppm
- TDS — Resolution: 1 ppm
- TDS — Accuracy: ±2% FS
- Temperature — Measuring range: 0 … 90 °C
- Temperature — Resolution: 0,1 °C
- Temperature — Accuracy: ±0.2°C +1 Digit
- General technical data — Measuring functions: MIN, MAX, HOLD
- General technical data: Temperature compensation 0 … 90°C / 32 … 194°F, automatic
- General technical data — Display type: LCD
- General technical data: Number of calibration points 3
- General technical data — Menu language: English, English (GB)
- General technical data — Protection class (device): IP57
- General technical data — (Rechargeable) battery: 4 x 1,5 V AAA battery , Alkali-manganese
- General technical data — Capacity: 1200 mAh
- General technical data — Operating conditions: 0 … 60 °C , 0 … 80 % RH
- General technical data — Storage conditions: 0 … 60 °C , 0 … 80 % RH
- General technical data — Dimensions: ( L x W x H )195 x 40 x 36 mm
- General technical data — Weight: 135 g
Delivery scope
- 1 x Water Analysis Meter / Conductivity Tester PCE-PH 30
- 1 x pH electrode
- 1 x Conductivity electrode
- 1 x pH 4 calibration liquid
- 1 x pH 7 calibration liquid
- 1 x 1413 μS / cm calibration fluid
- 1 x Storage solution
- 1 x Wrist strap
- 4 x 1.5V AAA battery
- 1 x User manual
