Coating thickness gauge with V-groove sensor / Measuring range from up to 0 … 5000 µm / Adjustable alarm limits / Robust housing / Software / Data storage / High accuracy of up to ±(1.0% of reading + 0.5 µm) / Optionally with ISO calibration certificate
The coating thickness gauge can reliably determine the thickness of, for example, plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 0 … 5000 µm on ferrous metals, the coating thickness gauge covers a wide range of measuring tasks. Because of the accuracy of up to ±(1.0% of mv. + 0.5 µm), the coating thickness gauge is a very precise measuring device. The sensor on the coating thickness gauge has a V-groove. Thanks to this V-groove, it is possible to carry out measurements on convex surfaces with the coating thickness gauge. In addition to the convex surfaces, measurements can also be carried out on concave surfaces with the coating thickness gauge.
During the measurements, the measured values can be saved on the coating thickness gauge. A memory of a maximum of 2,000 measured values is available for the coating thickness gauge. After a measurement run, the measured values from the coating thickness gauge can be transferred to a computer and analyzed using the software. For further processing of the measured values, they can be exported in CSV format.
A target/actual range can be stored with the limit value alarm function on the coating thickness gauge. If the test object is within the stored area at the coating thickness gauge, this is signaled by a green LED. If the measured value is outside the set range, this is indicated by a red LED from the coating thickness gauge. Because of the limit value alarm function, the coating thickness gauge is used, for example, in incoming and final inspection for quality assurance.
For a special protection of the electronics, the housing of the coating thickness gauge is additionally rubberized. Optionally, the coating thickness gauge can be equipped with an ISO calibration certificate.
Highlights
- Practical V-groove on the measuring heads
- High accuracy for small coatings
- Adjustable limit values
- Data memory for 2000 readings
- Measuring range of up to 0 … 5000 µm
- optionally with ISO-calibration certificate
Technical specifications
- Layer thickness — Measuring range: 0 … 100 µm
- Layer thickness — Resolution: 0,1 µm
- Layer thickness — Accuracy: after foil calibration ±(1.0 % of Rd +1 µm)
- Layer thickness: after zeroing ±(1.5 % of Rd +1 µm)
- Layer thickness — Measuring range: 100 … 2000 µm
- Layer thickness — Resolution: 1 µm
- Layer thickness — Accuracy: after foil calibration ±(1.0 % of Rd +1 µm)
- Layer thickness: after zeroing ±(1.5 % of Rd +1 µm)
- Sensor: Designation PCE-CT 80-2-PROBE
- Sensor — Battery: type Magnetic mode (Fe), Eddy current mode (NFe)
- NFe substrates such as: aluminium and copper: Min. measuring surface Ø 17 mm
- NFe substrates such as: aluminium and copper: Min. layer thickness 0.2 mm (on magn. materials)
- NFe substrates such as: aluminium and copper: 0.05 mm (on non-magnetic materials)
- NFe substrates such as: aluminium and copper: Min. radius of curvature convex 5 mm
- NFe substrates such as: aluminium and copper: Min. radius of curvature concave 25 mm
- NFe substrates such as: aluminium and copper: Cable length 1 m
- NFe substrates such as: aluminium and copper: Dimension Length: 65 mm, Ø 17 mm
- General technical data — Measuring functions: MIN, MAX, Average value
- Units µm, mm, mils — Display type: LCD with backlight
- Units µm, mm, mils — Display size: 1,97 Inch
- Storage medium Internal memory — Storage capacity: 2000 Values
- Storage medium Internal memory — Interface: Micro-USB
- Storage medium Internal memory: Automatic power-off 3 min
- Storage medium Internal memory: Number of calibration points 4
- Alarm optical: Alarm modes Display when the adjustable upper and lower alarm limits are exceeded
- Alarm optical — Menu language: English, German, Chinese, Russian
- Alarm optical — Protection class (device): IP30
- Alarm optical — (Rechargeable) battery: 3 x 1,5 V AAA battery , Alkali-manganese
- Alarm optical — Capacity: 1200 mAh
- Alarm optical: Performance 1,8 Wh
- Alarm optical — Operating conditions: 0 … 50 °C , 20 … 90 % RH
- Alarm optical — Storage conditions: -10 … 60 °C , 20 … 90 % RH
- Alarm optical — Dimensions: ( L x W x H )145 x 78 x 36 mm
- Alarm optical — Weight: 180 g
Delivery scope
- 1 x Coating Thickness Gauge PCE-CT 80HP-FN2
- 1 x Sensor
- 3 x 1.5V AAA batteries
- 1 x Carrying case
- 1 x Set of standard foils
- 1 x Calibration plates (Fe and NFe)
- 1 x Instruction manual
