Trotec TAC ECO Certified Virus Remover

Easy assembly and relocation instead of labor-intensive installation and retrofitting—the key advantages over fixed, large, and heavy floor-mounted equipment: flexibility of use. Thanks to the cart’s “Plug & Play” design, it can be used either as a mobile or stationary unit—it can be set up easily and flexibly exactly where the TAC is needed to provide protection. Since installation locations and intended uses can change time and again, effective hygiene concepts therefore require a high degree of flexibility. The TAC is a truly mobile device and can therefore always be set up quickly and easily exactly where it is needed to protect people from contamination and infection.

Another key advantage of the TAC is the air volume, which can be individually adjusted according to the room size and the required air circulation rate. Regardless of the room size or application, to “increase safety,” always select and set the correct air purification volume per hour.

Troteci’s high-performance TAC air purifiers offer you, your employees, customers, patients, and students a high level of protection against indirect exposure to aerosol particles. In addition to viruses and bacteria, the units safely remove harmful fine dust (e.g., from road traffic), as well as pollen and allergens, from the indoor air.

The effectiveness of the TAC ECO room air purifier has been confirmed by leading national and international institutions in numerous independent scientific studies.

Clean air with a high airflow capacity of up to 1,000 m³/h, filtered to remove viruses and bacteria, ensures optimal air circulation, airflow, and frequent air exchange. Proper airflow and guidance are absolutely essential for a high level of safety. In particular, the high maximum airflow (boost mode) is ideal for rapid decontamination (shock filtration) during breaks or in changing rooms.

The TAC V+, TAC M, and TAC XT use fully encapsulated H14 metal lamellar high-temperature filters that are “Made in Germany” combined with high-tech filter media optimized for airflow and specially developed for Trotec. Each high-quality filter is individually tested and certified.

66% greater H14 airflow—up to 30% lower energy consumption and up to 8% less noise.

Sensor-based FlowMatic control in the TAC V+, TAC M, and TAC XT works just like a cruise control system in a car: even if the filter becomes increasingly clogged with coarse and fine dust, you don’t have to worry about a drop in airflow or the need for air replacement.

The system’s performance is continuously and dynamically regulated so that the target air volume, once set, is maintained at a constant level at every performance level! This ensures greater safety, a longer filter service life, and higher system efficiency.

Just like an airbag in a car—you almost never need it, but it’s important to have it there! Reliably killing viruses and bacteria through heat treatment (15 minutes at a temperature of approximately 100 °C) offers significant added value in terms of hygiene and safety. This is recommended by leading scientists for safe, continuous operation.

Cleaning the thermal filter is fully programmable and takes place completely automatically, e.g., outside of working hours or school hours.

Weekly thermal decontamination requires only 1.0 kWh of additional energy per week, and—due to the limited temperature range of the chamber and the short duration of the treatment—it does not raise the room temperature.

Automatic self-cleaning of the filter to ensure a longer filter life and to prevent bacteria, mold, biofilm, and the resulting odors.

Filter regeneration takes place simultaneously with thermal decontamination at approximately 100 °C and is scientifically recommended, as most bacteria and microorganisms are destroyed only at approximately 100 °C. It is not without reason that, if microbes are found in drinking water, the water should be boiled for at least three to five minutes before use—that is, heated to approximately 100 °C.

Thermal filter regeneration: for a longer filter life, better filter hygiene, and to prevent filter odors.

Thanks to their fully programmable and updatable touchscreens, the TAC V+, TAC M, and TAC XT can be individually configured for their operating and standby times, so you don’t have to worry about a thing.

A quieter, high-performance range hood relative to its airflow capacity and unit size.

An exceptionally stable and scratch-resistant metal casing, specially designed for environments where many people gather, work, play, and study.

Maintenance of the TAC V+ and TAC XT is very inexpensive. For one thing, the average energy consumption of the unit’s basic functions (fan, electronics, etc.) is only 160 Wh. Some competitors may have nominally lower consumption, but considering their high clean air volume, the TAC V+ and TAC XT are extremely cost-effective per cubic meter of virus-filtered clean air.

On the other hand, the additional function of thermal decontamination—which includes simultaneous filter regeneration—offers not only safety and filter hygiene but also a decisive advantage—as well as enormous savings potential! When activated once a week, the additional energy required to clean the filter of contaminants amounts to just under 15 euros per year (about 1 kWh per week). At the same time, this improves the filter’s hygiene and extends its service life. You won’t have to buy a new filter as often, and with these savings, you can enjoy Thermodekon’s added value—maximum filter safety and hygiene—practically for free!

roteci high-performance air purifier with HEPA-H14 filter, compliant with EN 1822 (corresponds to ISO 45 H according to ISO 29463)
	TEC200	TAC V +	TAC M	TAC ECO
Use an H14-HEPA filter for high-performance air purification in accordance with EN 1822	✓	✓	✓	✓
Filter replacement screen for pre-filters and HEPA filters	✓	✓	✓	✓
Mobile version	✓	✓	✓	✓
FlowMatic Volume Control	✓	✓	✓	–
Programmable touchscreen that can be updated via USB	✓	✓	✓	–
Cleaning Contaminants from the Thermal Filter and Regenerating the Filter	✓	✓	–	–
Use for heating rooms and tents (heat output 18/27 kW)	✓	–	–	–
Use for thermal cleaning of rooms and objects	✓	–	–	–
Use for thermal disinfection	✓	–	–	–