T260 – Infrared Thermohygrometer
Air temperature (°C, °F), relative humidity (% rH) and absolute humidity (g/m³), specific humidity (g/kg of dry air), dew point temperature (dp °C, dp °F), and surface temperature (°C, °F) can be measured.
The T260 combines a thermo-hygrometer, a laser pyrometer, and a dew point alarm into a single device.
climate measurement
The T260 measures air temperature and relative humidity. Alternatively, it displays the dew point, absolute humidity in g/m³, or mass ratio in g/kg.
dew point alarm
The wall’s surface temperature is measured using a built-in infrared sensor and compared to the dew point temperature. Now simply point the infrared sensor at the wall’s surface. This allows you to effectively “scan” larger areas.
If the surface temperature of the wall is near or even below the dew point, an alarm will sound. In addition, a flashing laser cursor draws your attention to the area below the dew point and indicates the affected area on the wall. Keep in mind that the measuring range of the infrared sensor on the wall increases as the measurement distance increases. At a distance of 1 m, the diameter of the measurement spot is approximately 10 cm. At a distance of 2 m, the diameter of the measurement spot is approximately 20 cm. The switchable laser aiming aid always indicates the center of the measurement spot.
Measuring Humidity in a Balance
The moisture content of building materials can also be determined by measuring the humidity in drill holes or cavities. If the actual moisture content corresponds to the value of the sorption isotherm, the building material is in a state of equilibrium in terms of building physics. If the moisture content exceeds this value, there is “structural moisture.”
Three operating modes and a wide range of measurement functions—all of which can be selected with just one hand using the touchscreen—make the T260 a pocket-sized mobile measuring station:
In TH mode, the measuring device corresponds to the T210 and offers all of its functions.
In IR mode, the T260 can use a laser pyrometer to measure the surface temperature at the location indicated by the measurement system. The measured surface temperature is then continuously displayed in real time at the top of the screen.
The dew point alarm feature is a particularly practical advantage:
In DP mode, the easy-to-read touchscreen displays both the dew point and surface temperature simultaneously. As soon as the wall temperature is close to or below the dew point, the T260 alerts the user with a laser signal and an audible alert. The alarm function allows you to inspect wall surfaces in the shortest possible time and quickly identify weak spots! Alarm thresholds can be configured individually.
The T260 infrared thermohygrometer can be connected to a computer via a USB cable. Using the optional MultiMeasure Studio software (available for free in the service/download area at trotec.de), data measured by the T260 can be transmitted directly to a computer via the web in real time and saved for later analysis or reporting.
Advantages:
- A measuring device developed and manufactured in Germany in accordance with the highest quality standards
- German industrial design featuring a sturdy, high-quality two-component construction; protection class IP54
- An easy-to-clean, continuous glass surface made of highly scratch-resistant Blanview specialty glass, which ensures that measured values are displayed with high contrast even in sunlight
- Capacitive Touchscreen Control Panel
- High-resolution color display for simultaneous display of two measured values
- Pyrometer function for accurate measurement of surface temperature
- Dew Point Alarm Function
- Accurate measurement of air temperature and humidity—can be configured for local altitude and pressure
- The integrated calibration function (user offset) allows for long-term use without compromising measurement accuracy
- Function for saving measured values via USB with an active software connection
- Includes MultiMeasure Studio measurement data management software (download the standard version)
- ISO calibration I.2101 for relative humidity and air temperature (% / °C). Calibration is performed at 3 standard points: 20%, 50%, and 80%, each at a temperature of 20 °C.
Here are some brief technical details about the T260:
- Air temperature measurement range: -20 °C to +50 °C
- Humidity measurement range: relative humidity 0–100%
- Surface temperature measurement range: -70 °C to +380 °C
- Resolution of air temperature: 0.1 °C
- Resolution at 0.1% relative humidity
- Surface temperature resolution: 0.1 °C
- Air temperature accuracy: ± 0.2 °C (0 to 40 °C); otherwise ± 0.4 °C
- Humidity accuracy: ± 2% rH
Air Temperature (NTC)
- Measurement range: -20 °C to +50 °C
- Tolerance: ± 0.2 °C (0 to 40 °C); otherwise ± 0.4 °C
- Resolution: 0.1 °C
Object temperature (pyrometer)
- Measurement range: -70 °C to +380 °C
- Tolerance: ± 0.5 °C (0 to +50 °C); otherwise ± 4 °C
- Resolution: 0.1 °C
- Optical resolution: 12:1
- Typical accuracy: ± 1.0 °C (object temperature -40 to 0 °C, ambient temperature> to -20 °C)
- Typical accuracy: ± 0.5 °C (object temperature 0–60 °C, ambient temperature> 0 °C)
- Typical accuracy: ± 1.0 °C (object temperature 60–120 °C, ambient temperature> 0 °C)
- Typical accuracy: ± 1.0 °C (object temperature 120 to 180 °C, ambient temperature> 0 °C)
- Typical accuracy: ± 3.0 °C (object temperature 180 to 240 °C, ambient temperature> 0 °C)
- Typical accuracy: ± 4.0 °C (object temperature 240 to 380 °C, ambient temperature> 0 °C)
Humidity Sensor (Capacitive)
- Measurement range: 0 to 100% relative humidity
- Tolerance: ± 2% RH
- Resolution: 0.1% RH
- Measurement frequency: 2 times per second
- Operating temperature: -20 °C to 50 °C
- Storage temperature: -20 °C to 60 °C
- Battery type: 4x AA 1.5 VDC
- Dimensions (W x L x H): 202 x 63 x 35 mm
T-Series Silicone Protective Case
The perfect way to protect your device from dirt, scratches, and slipping out of your hand. Of course, the ports remain accessible.
