Professional Infrared Heating Panel / Infrared Heater TIH 650+

Professional Infrared Heating Panel / Infrared Heater TIH 650+

The TIH 650 professional infrared heating panel is ideal for drying the walls of new buildings or after water damage. Solid masonry can be dried faster than with conventional drying methods.

However, a prerequisite for an efficient drying process is the even distribution of heat across the entire surface of the heating plate. Unlike conventional infrared heating panels, which often result in uneven heat distribution, the TIH 650+’s innovative material composition ensures absolutely uniform radiation and thus heat distribution across the entire surface of the heating plate, which also features an insulated back side, resulting in optimal radiation power directed at the target and guaranteed maximum energy efficiency.

To dry large surfaces, you can quickly and reliably stack up to three infrared heating panels.

Since the TIH 650+ operates quietly and does not consume oxygen, it can be used without any problems even in residential areas.

Construction of a Screwless Base

The TIH 350+ and TIH 650+ come with identical legs, so both heating plates can be installed using the same accessories. In addition, the legs are now even more compact and can be attached to the heating plate without tools.

To this end, the previous screw connection has been replaced by a spring-loaded pin integrated into the base, which snaps securely into place during installation and ensures a proper connection between the mold and the heating plate. No additional assembly tools are needed: pull, remove, pull, secure—it’s very simple. For transport, the legs can be folded to save space in the heating side of the plate mounting device.

The legs also help ensure optimal positioning. They are designed so that when the legs come into contact with the wall, the optimal heating distance and efficiency are automatically guaranteed. Therefore, there is no need to measure the distance during installation.

The TIH 350+ and TIH 650+ professional infrared heating panels can be used individually or as needed:

• TIH 350+ individual horizontal floor installation using the included legs.
• Optional stacking handles allow you to use two or more TIH 350+ units for stacking.
• TIH 650+ individual horizontal floor installation using the included legs.
• TIH 350+ individual vertical floor installation using the included legs.
• TIH 650+ individual vertical floor installation using the included legs.
• Installing the TIH 650+ on the floor using the included legs, and at a higher level—via the stacking handles—using the stacking system. The TIH 650+ and TIH 350+ can be stacked together as needed.
• Installation of TIH 350+ and higher-level floors—via connection with stacking handles—using an installed stacking system. With this option as well, the TIH 650+ and TIH 350+ can be combined as needed.
• Using the optional mounting kit and the clamp set included in the assembly kit, the TIH 650+ can also be attached to commercially available assembly supports to dry higher areas.
• The TIH 350+ can also be mounted on mounting brackets using the optionally available mounting kit and mounting clamps.

The TIH 650+ impresses with its very uniform light output across its entire surface

Thermographic studies show that conventional infrared heating panels often result in uneven heat distribution, which prevents the surface from drying evenly. Furthermore, it is not uncommon for these models to have fluctuating heating power, and the temperature of the heating elements is often too high.

However, extreme heat treatment can have adverse consequences, especially for sensitive building materials. For example, if gypsum-based building materials are heated excessively, crystalline water is released, which can lead to a loss of the structure’s overall stability.

In contrast, TIH’s professional heating panels are characterized by stable temperature values and very uniform radiant power across their entire surface. The TIH 650+’s heat output and distance from the wall were designed by the engineers so that, even with gypsum-based building materials, the material cannot be heated to temperature ranges that would destabilize the structure.

Advantages:

• Professional quality “Made in Germany” — original Trotec products
• High-quality infrared heating panel with a true 650-watt heating capacity
• Innovative materials ensure even heat distribution across the entire surface
• Rear insulation ensures maximum energy efficiency and optimal object-oriented radiative power
• A highly efficient heating process using environmentally friendly IR-C radiation for rapid drying of masonry
• Heat transfer via light waves—direct heating of objects without convective losses
• Pure heat—no noise, no odor, no condensation, and no oxygen consumption
• Can be stacked quickly and securely
• Can be stacked with the TIH 350+ IR heating plate
• A robust aluminum composite structure with high torsional rigidity and maintenance-free Trotec quality
• Legs that can be assembled without tools
• Built-in base mounting clamp
• Integrated Energy Consumption Meter (MID-compliant)

Technical details:

• Heating capacity: 650 watts
• Effective area: 0.85 m²
• Mains voltage: 230 V / 50 Hz
• Plug type: CEE 7/7
• Dimensions (W x L x H – without legs): 36 x 1370 x 625 mm
• Portability: portable
• Cable length: 3 m
• Overheating Protection
• Protection Class: IP44
• Weight: 10.7 kg