Adsorption Dryer TTR 10000 1322 L/24h 10,500 m³/h 300 Pa

ADSORPTION DRYER TTR 10000

Maximum dehumidification capacity, even in rooms with a low dew point

The TTR 10000 has a nominal dehumidification capacity of approximately 1,322 kilograms per day and an air flow rate of 9,800 cubic meters of dry air per hour at a static pressure of 300 Pa; the TTR 10000 is optimallyequipped to meet very high dry air demands even in cool environments. Ideal conditions, for example, for maintaining constant dryness, as well as in mechanical engineering, for protecting machinery, equipment, and buildings from corrosion, condensation, or mold growth—for example, in water systems or electrical control centers.

High-performance, made in Germany

The TTR 10000’s durable and low-maintenance design and extremely long service life are not without reason—after all, this is an adsorption dryer, which has been developed and manufactured in Germany according to Trotec’s highest original production quality standards and consists exclusively of efficient, branded components featuring the latest generation of technology from leading component manufacturers.

The TTR 10000 high-performance fans are powered by energy-efficient EC motors, whose speeds can be adjusted independently of one another using the Duoventic controller. Thanks to this integrated Duoventic airflow control, you can quickly configure the TTR 10000 dehumidifier to suit your needs without any modifications: very dry air with a low airflow, a larger volume of dry air, or maximum circulation air capacity with a moderate airflow.

The Flowmatic S reliably maintains the volume flow within the target range of
The TTR 10000 adsorption dryer comes standard with a Flowmatic-S volume flow regulator, which automatically detects and compensates for pressure drops using sensors. Volume flow or pressure regulation can be adjusted as needed via a control signal. As soon as the Flowmatic S detects deviations, it neutralizes them, thereby ensuring that the specified volume flow or pressure remains constant. This means you always have a continuous supply of dry air in the required quantity.

The TTR series adsorption dryers use a vapor pressure gradient between the moist air and the hygroscopic sorbent—which has an ultra-large surface area and is integrated into the drying wheel—to dry the air. This process ensures high moisture removal even at low humidity and low air temperatures.

The TTR Trisorp Dual Principle

The TTR 10000 has two separate air ducts for process air and regeneration air, each equipped with a fan. The process air to be dried is drawn in by a fan and flows through the drying sector of the continuously rotating drying wheel, where the moisture it contains is removed by being bound in the sorbent, and it then flows out as dry air through the air outlet.

Regeneration air is also drawn in by a separate fan and directed through the rinsing section. Since the desiccant wheel heats up due to the heat of adsorption and the heat of regeneration, the desorption section is used to recover heat and cool the desiccant wheel, which also reduces the required energy input and improves moisture removal efficiency, especially at lower set points.

As the air flows through the heating register, it warms up and its relative humidity is greatly reduced, so that as the air passes through the regeneration section, it can reabsorb the moisture bound in the silica gel and be discharged outside through the moist regeneration air outlet.

Added value at no extra cost

The TTR 10000 dehumidifier comes standard with a wide range of features that ensure reliable operation, easy handling, and a long service life with minimal maintenance:

• Millennium PLC Control Module for Precise Energy Management
• Flowmatic Volume Flow Control
• Rotor Rotation Control (Rotor and Drive)
• Overheating protection system with a restart lock (regeneration air)
• Operating Temperature Control (Regeneration Air)
• G4 air filter with Z-Line design, featuring electronic monitoring and a collective warning light
• External On/Off Terminals and Humidity Sensor Terminals
• Potential-free contacts for operation, fault, and filter
• Configurable Airflow Direction Adjustment
• Sturdy and low-maintenance steel body, galvanized and painted

In addition, the TTR 10000 can be equipped with a wide range of options to meet your individual needs.

Various Applications

The TTR 10000 adsorption dryer is capable of continuous operation even at low dew points, with a very high moisture removal capacity, making it suitable for many applications, such as:

• Air pre-drying to maintain the pourability and flowability of hygroscopic products in storage, transport, and dosing systems
• Process Air Drying for Gas Turbines and Humidity Control in Gas Distribution Stations
• Keeping Freezing Tunnels and Deep-Freeze Warehouses Ice-Free
• Air drying or process air drying in the chemical and pharmaceutical industries, the electronics and semiconductor industries, or the food industry
• Preventing condensation, material degradation, or granule clumping during plastic processing
• Process Air Drying and Moisture Removal in the Steel Industry
• Air Drying and Dew Point Control in Cold Storage Facilities
• Air drying in water treatment facilities and pumping stations
• Air conditioning systems for ammunition depots or military supply stores
• Air Dehumidification and Dew Point Control in Clean and Dry Rooms
• Air conditioning in dry storage facilities or lumber yards