TTR 2800 Commercial Adsorption Dryer
The TTR 2800, like other adsorption-type air dryers in the TTR series, comes standard with integrated heat recovery and electronic control of the dry air flow rate, making it one of the most economical of its kind in the world!
A robust housing and technology developed in accordance with the highest industry standards. These features make the TTR 2800 rotary dryer a reliable piece of equipment for moisture removal, even under harsh conditions.
Advantages of the TTR 2800 commercial desiccant dehumidifier (376 l/24 h, 3,150 m³/h, 300 Pa):
- Rugged, high-quality equipment “Made in Germany”
- High moisture removal performance even at low temperatures
- Reliable silica gel sorption rotors that are washable and feature a mechanically very stable design
- With integrated heat recovery
- Electric Regenerative Heating System
TTR 2800 Standard Features at a Glance:
-
As standard, the TTR 2800 air dryer is equipped with numerous features and functions that ensure reliable operation, easy handling, and a long service life with minimal maintenance.External on/off connection terminals
- Hygrostat connection terminals
- Potential-free contacts (operating, fault, filter)
- A sturdy and easy-to-maintain stainless steel housing
- Rotor Rotation Control (Rotor and Drive)
- Duoventic Control for Process Air and Regeneration Air Fans
- Overheating protection system with a restart lock (regeneration air)
- Operating Temperature Control (Regeneration Air)
- G4 air filters with Z-line design, featuring electronic monitoring and a collective warning light
- External On/Off Terminals and Humidity Sensor Terminals
- Potential-free contacts for operation, fault, and filter
- Configurable Airflow Direction Adjustment
- As standard, the TTR 2800 air dryer is equipped with numerous features that ensure reliable operation, easy handling, and a long service life with minimal maintenance
Possible additional options:
- Millennium Management Module
- Flowmatic Volume Flow Control
- humidity/temperature control
- Dew point sensor -80 °C … +20 °C
- Touchscreen for device operation
- GSM Remote Connection
- Remote Connection via Wi-Fi
- Heat Exchanger Module
- Steam Heater for Regenerative Air
- Gas-fired heater for regeneration air
- Electric Fan Heater for Dry Air
- HG 120 External Hygrostat
- HG 125 External Hygrostat
- Transport frame (stackable), with wheels
*With Duoventic, the output of each fan can be adjusted independently using a potentiometer; there is no need for gas controls on-site
| Dry air (supply air at 20°C / 60% RH) | ||
|---|---|---|
| Moisture removal [kg/24h] | 376.8 | |
| Moisture removal [kg/h] | 15.7 | |
| Free-flow air volume [m³/h] | 3,150 | |
| Nominal Air Volume | Dry Air (Supply Air 20°C/60% RH) [m³/h] | 2800 | |
| External pressure [Pa] | 300 | |
| Connection Inlet Diameter Ø [mm] | 315 | |
| Connection port Ø [mm] | 315 | |
| regeneration air | ||
| Nominal Air Volume [m³/h] | 570 | |
| External pressure [Pa] | 300 | |
| Connection Inlet Diameter Ø [mm] | 200 | |
| Connection port Ø [mm] | 200 | |
| operating principle | ||
| Operating Principle | TTR Trisorp Dual | |
| Workspace | ||
| Minimum temperature [°C] | -20 | |
| Maximum temperature [°C] | 40 | |
| Minimum relative humidity [% RH] | 0 | |
| Maximum humidity [% RH (non-condensing)] | 100 | |
| electrical values | ||
| Power connection | 380–480 V/50–60 Hz | |
| Rated Current [A] | 31.7 | |
| Installed capacity [kW] | 21:6 | |
| Heating capacity [kW] | 18.9 | |
| Recommended protection [A] | 32 | |
| electrical connection | ||
| terminal connection | ||
| automatic moisture removal | ||
| continuous moisture removal | ||
| dimension | ||
| Length (without packaging) [mm] | 1,348 | |
| Width (without packaging) [mm] | 769 | |
| Height (without packaging) [mm] | 1,323 | |
| Weight | ||
| (without packaging) [kg] | 250 | |
| EQUIPMENT, FEATURES, AND FUNCTIONS | ||
|---|---|---|
| Housing type | ||
| stainless steel | ||
| Wide-Range Voltage | ||
|---|---|---|
| Rotor Rotation Control (Rotor and Drive) | ||
| Overheating protection system with a restart lock (regeneration air) | ||
| Operating Temperature Control (Regeneration Air) | ||
| Filter Monitoring (Airflow and Collective Warning Light) | ||
| Dual-valve control | ||
| Configurable airflow direction adjustment (adjustment requires minimal effort) | ||
| Terminals for external ON/OFF control | ||
| Terminals for a hygrostat | ||
| Potential-free contacts (operating, fault, filter) | ||
| Hours Worked Counter | ||
| Airflow Control | ||
| With integrated heat recovery |
