Material Hardness TesterPCE-2900
Modern, dynamic hardness tester with colour display / Memory /For metallic materials with hardness scales such as Vickers, Rockwell, Brinell, Leeb, Shore and Tensile
The material hardness tester PCE-2900 has been developed for hardness measurements on metallic materials. The material hardness tester measures the material hardness in Vickers, Brinell, Rockwell, Leeb and Shore. The material hardness tester PCE-2900 measures the hardness according to the Leeb rebound principle. An impactor bounces on the workpiece via a firing pin and the metal hardness is measured via the rebound. The PCE-2900 material hardness meter is equipped with a backlit colour display.
Likewise, the buttons on the PCE-2900 are illuminated. Thus, the display can be read well even in low light conditions. The impact device is connected to the hardness tester via a cable. The material hardness tester PCE-2900 has an internal memory of 6 x 100 measurement sets. The memory thus allows a documentation of the measured values. Via the integrated USB and WiFi interface, the measured values can be transferred from the material hardness tester via software to a PC. The material hardness tester is powered by commercially available 1.5V AA batteries and has a battery life of about 50 hours.
Highlights
- USB and WiFi for data transmission
- Large, bright touch-screen LCD display
- Large measuring range
- Measurement possible in every position
- Hardness scales (HRC, HRB, HV, HB, HS)
- For all metallic materials
Technical specifications
Hardness Measuring range 170 … 960 HLD Resolution 1 HLD Accuracy± 0.5% General technical data Measuring principle Rebound method Measuring direction 360 ° Display type LC colour display Display size 2,8 Inch Storage medium Internal memory Storage capacity 600 Data records Interface USB, WiFi Materials Steel, Cast steel, Stainless steel, Spheroidal graphite cast iron, Grey cast iron, Brass, Bronze, Copper, Aluminium, alloy steel Operating time 50 h Automatic power-off from…to 1 … 15 min. Reproducibility±6 HLD Impact device D-type Hardness scales HL, HB, HRA, HRB, HRC, HV, HS Minimum mass of the sample Direct measurement: 5 kg Connected measurement: 2 … 5 kg With coupling gel: 0.05 … 2 kg Minimum thickness of the sample Direct measurement: > 5mm With coupling gel: 0.8 … 5 mm Menu language English, German, Chinese Protection class (device)IP20 (Rechargeable) battery 2 x 1,5 V AA battery , Alkali-manganese Capacity 2970 mAh Operating conditions 10 … 50 °C , 0 … 90 % RH Storage conditions-30 … 60 °C , 0 … 90 % RH Dimensions ( L x W x H )160 x 80 x 35 mm Weight 210 g
Delivery scope
1 x Material Tester PCE-2900 1 x Impactor D 1 x Test block 2 x 1.5V AA batteries 1 x User manual 1 x Carry case
