T3000 Multifunctional Measuring Device
With the MultiMeasure Professional Series T3000, you are optimally equipped for a wide range of measurement tasks; this model is compatible with nearly all well-known sensors and electrodes in the MultiMeasure series.
Professional multifunctional measuring device for measuring:
- Relative Humidity and Temperature
- Surface temperature
- Wood and Construction Moisture
- Graphical display of moisture distributions (network measurements) during leak location and damage assessment
- Air Flows
- Trace gas (H2) during leak detection
Thanks to the innovative universal base unit concept, which features a new type of touch-sensitive key control and is supplemented by flexibly interchangeable sensors, users no longer need to carry around an entire collection of measuring instruments. Thanks to a wide selection of sensors and electrodes, the T3000 measuring device is suitable for classic applications in industrial and laboratory measurement technologies, as well as for structural diagnostics and many other areas of the construction industry, such as HVAC/R, flooring and surface coating companies, painters, and carpenters who need to check the moisture content of walls, floors, or wood, for example.
TS 210 SDI Climate Sensor
Temperature and humidity readings are displayed simultaneously in real time on the T2000/T3000 screen. If desired, in addition to the measured value, you can also display its minimum, maximum, average, or “hold” value.
Here are some technical details about the TS 210 SDI:
Display temperature
- Temperature measurement range: -20.0 °C … +50.0 °C
- Resolution: 0.1 °C
- Accuracy: ± 0.4 °C (-10 °C … +50 °C); otherwise ± 0.5 °C
- Units (unit 1) for display 1: °C, °F
Display of relative humidity, absolute humidity, dew point, and specific humidity (T3000 only)
- Measurement range for relative humidity: 0.0 … 95.0% relative humidity
- Resolution: Humidity: 0.1% relative humidity
- Accuracy: ± 2% relative humidity
- Units (Unit 2) for display unit 2: % rH, dp °C, dp °F, g/m³
TS 660 SDI Material Moisture Sensor
Some technical specifications for the TS 660 SDI material moisture sensor:
- Measurement principle: dielectric, indicative
- Measurement range: 0.0 to 200.0 digits
- Resolution: 0.1 digits
- Accuracy: 0.1 digits
- Penetration depth: up to 40 mm
TS 60 Hand-Held Electrode
For measuring moisture in wood and buildings using the resistance method (can be connected to the T500, T3000, and DL200P).
Box for Replacement Electrode Tips
TC 20 Connection Cable
TC 30 Connection Cable
TS 12/200 Round Electrode Pair, 4 mm, Insulated
Insulated electrodes (200 mm long, 4 mm in diameter) for targeted moisture measurement at the levels of concealed components where insulation of the electrode shaft is required. A lack of insulation would distort the measurement results. Experience has shown that the most common application is determining moisture distribution in multilayer wallor ceiling structures, such as floating screeds, multi-layered masonry, wooden beam ceilings, warm roofs, and similar structures.
Pair of flat electrodes TS 16/200
Insulated electrodes for measuring material moisture using the resistance method (can be connected to the T500, T3000, and DL200P models).
Ground connection
Test Block V1
To check for measurement errors and verify measurement accuracy when using resistance electrodes to measure moisture in wood or buildings with MultiMeasure T500 or T3000 meters.
Pyro meter BP21
The BP21 infrared thermometer has a wide range of applications. This device is used as standard in many building diagnostics processes, as well as in industry, crafts, commerce, and hobbies. Infrared thermometers are used for non-contact measurement of surface temperatures and are therefore ideal for diagnosing dew points and determining heat loss, for example, on wall surfaces. They are also suitable for locating underfloor heating loops, inspecting control panel components, or regulating the temperature of motors, turbines, bearings, etc. The BP21 has a geometric resolution of 12:1.
BD21 Distance Meter
With this handy measuring device, you can quickly and easily determine distances, areas, and volumes with laser precision at the touch of a button—even in hard-to-reach places. Compared to cumbersome traditional measurement methods using a plumb line or measuring tape, the BD21 always provides you with error-free results, allowing you to, for example, accurately calculate the amount of materials needed—such as wall paint, hardwood flooring, or tiles.
1x carrying case, II MultiMeasure Series T3000
Silicone Protective Cover, T Series
The perfect way to protect your device from dirt, scratches, and accidental drops. Of course, the ports remain accessible.
| optics | ||
| Optical resolution (D: S) | 12.01 | |
| Smallest measurement point | Ø 12.5 mm (distance 150 mm) | |
| Infrared Temperature Sensor [°C] | ||
| Measurement range min [°C] | -35 | |
| Measuring range, max [°C] | 800 | |
| Accuracy max [°C] | ± 2 °C or ± 2% of the measured value | |
| Infrared Temperature Sensor [°F] | ||
| Measurement range min [°F] | -31 | |
| Maximum measurement range [°F] | 1,472 | |
| Accuracy in [%] | 1.05 | |
| Accuracy ± min [°F] | 4.05 | |
| Maximum Accuracy [%] | 1 | |
| Accuracy ± max [°F] | 1.08 | |
| Environmental Conditions | ||
| Operating – min temperature [°C] | 0 | |
| Operating – maximum temperature [°C] | 50 | |
| Operating – min. rel. humidity [% rH] | 10 | |
| Operating range: approx. – max. Relative Humidity (non-condensing) [%] | 90 | |
| Storage – min. temperature [°C] | -10 | |
| Storage – maximum temperature [°C] | 60 | |
| Storage – Max. Relative Humidity (non-condensing) [%] | 80 | |
| Screen | ||
| LCD | ||
| solid-color | ||
| Device Control | ||
| Push buttons | ||
| Protection Class | ||
| IP54 | ||
| Temperature Sensor | ||
| reaction time | 0.3 s | |
| Spectral sensitivity | 8–14 µm | |
| Laser (target indicator) | ||
| Excellent | 2 (II) | |
| Wavelength [nm] | 630–670 | |
| Power [mW] | 1 | |
| power source | ||
| Internal (battery) | 1 x 9 V block battery | |
| Housing Design | ||
| plastic | ||
| dimension | ||
| Length (without packaging) [mm] | 150 | |
| Width (without packaging) [mm] | 45 | |
| Height (without packaging) [mm] | 108 | |
| weight | ||
| (without packaging) [kg] | 0.177 | |
| STANDARD SCOPE OF DELIVERY | ||
| Standard Scope of Delivery | ||
| Measuring device | Yes | |
| Battery | Yes | |
| Bag/Case | Yes | |
| User Manual | Yes | |
| SPECIFIED DIMENSIONS AND FUNCTIONS | ||
| Features and Equipment | ||
| Material Temperature [°F] | Yes | |
| Material temperature [°C] | Yes | |
| internal sensors | ||
| Displaying the Minimum Value | ||
| Displaying the Maximum Value | ||
| Measurement Hold Function | ||
| Switching function °C / °F | ||
| Automatic Shutdown | ||
| backlit screen | ||
| switchable dual laser | ||
| Alarm function with user-defined thresholds | ||
| Audible Alert Function | ||
| Continuous Measurement Function | ||
