+372 5332 2258
+372 5670 4022
info@proair.ee
Kuma tee 4, Peetri, Estonia
Mon–Fri 9:00 a.m.–5:00 p.m.
EST
Tecnifan TDA – SR 3100 dual-inlet centrifugal fan – 53,800 m³/h

Tecnifan TDA – SR 3100 dual-inlet centrifugal fan – 53,800 m³/h

Categories:
Centrifugal FansIndustrial/Commercial Fans and Blowers

Tecnifan TDA – SR 3100 dual-inlet centrifugal fan – 53,800 m³/h

Two-inlet centrifugal fans, semi-reinforced series, made of galvanized steel, grade Z-275. Free-running output shaft for belt drive. Includes a double-shaft end and a square frame, which facilitates assembly in eight possible positions.

  • Available for backorder (1–2 weeks)
Free shipping For orders over €250
14-Day Return Policy Worry-Free Right to Purchase
Safe Payment

Tecnifan TDA – SR 3100 dual-inlet centrifugal fan – 53,800 m³/h

Two-inlet centrifugal fans, semi-reinforced series, made of galvanized steel, grade Z-275. Free-running output shaft for belt drive. Includes a double-shaft end and a square frame, which facilitates assembly in eight possible positions.

Centrifugal Fan

The forward-curved impeller is manufactured with integrated blades, which give the fan high rigidity and high performance. The bearings are rigid, self-aligning ball bearings that are sealed and lubricated for the entire service life.

The small-series design consists of side frames and a support crossbar, while the large-series design includes a triangular frame and bearing supports.

Technical Catalog TDA – SR
TDA – SR Commercial Brochure

A Small Series

Type Size in inches Max Speed (min) Maximum ABS power (kW) Max Airflow (m²/h) Maximum Total Pressure (Pa) Approximate Weight (kg) Technical Specifications
SR T2SR SR T2SR SR T2SR SR T2SR SR T2SR
TDA 7/7 – SR 7/7 2700 2500 1.2 1.5 3100 6200 960 770 6 13
TDA 9/7 – SR 9/7 2100 2100 1.5 2 4250 8500 1090 890 10.5 20
TDA 9/9 – SR 9/9 2100 2100 1.7 2 5100 10200 1000 830 11.5 22
TDA 10/8 – SR 10/8 1900 1900 2 3 5150 10300 1130 1000 12 25
TDA 10/10 – SR 10/10 1900 1900 2.5 3 6100 12200 1170 960 13.5 28
TDA 12/9 – SR 12/9 1600 1600 3 3.5 6850 13700 1260 1010 17 33
TDA 12/12 – SR 12/12 1600 1600 3 3.5 8550 17100 1050 800 18.5 40
TDA 15/11 – SR 15/11 1300 1200 4 5 9700 19400 1080 830 23.5 45
TDA 15/15 – SR 15/15 1300 1100 4.5 6 12350 24700 1000 700 27.5 60
TDA 18/13 – SR 18/13 1100 1000 5.5 7 13300 26600 1140 870 33 72
TDA 18/18 – SR 18/18 1100 1000 6 7 17300 34600 1020 750 38.5 82

Major Series

Type Size in inches Max Speed (min) Maximum ABS power (kW) Max Airflow (m²/h) Maximum Total Pressure (Pa) Approximate Weight (kg) Technical Specifications
TDA 20/15 SR 20/15 900 7.5 19650 900 63
TDA 20/20 SR 20/20 800 7.5 23550 690 75.5
TDA 22/15 SR 22/15 800 8 23150 830 66
TDA 22/20 SR 22/20 750 8 27100 740 75
TDA 22/22 SR 22/22 700 8 29500 640 83
TDA 25/20 SR 25/20 550 9 34200 560 88
TDA 25/25 SR 25/25 550 9 39350 570 100
TDA 30/20 SR 30/20 550 11 40850 800 95
TDA 30/28 SR 30/28 450 11 53800 590 126
RUBBER-TYPE ANTI-VIBRATION MOUNTS

Rubber-type vibration-damping mounts are supplied as optional accessories in sets of four, along with the screws needed to install them. They are selected based on the weight and rotational speed of the motor fan.

SPRING-TYPE T+P ANTI-ROLL BAR MOUNTS

Spring-type anti-vibration mounts are supplied as optional accessories in sets of four, along with a mounting plate and the screws needed to install them. They are selected based on the weight and rotational speed of the motor fan.

FIRE-RESISTANT CONSTRUCTION

The fans are manufactured in accordance with the UNE-EN 14986 standard. The spark-proof design includes an inlet guard, as well as side plates or a cow’s-mouth inlet, depending on the fan size.

INPUT flange (NOT INSTALLED) – S/I

Made of galvanized steel, it is designed to fit the intake opening of single-intake fans. It is shipped separately, not pre-installed.

IN-WALL (INSTALLED) – S/I

Made of galvanized steel, it is designed to fit the intake opening of single-intake fans. It is delivered fully assembled.

OUTPUT SOCKET (NOT INSTALLED) – D/I

Made of galvanized steel, it is designed to fit the outlet of a fan with two inlets. It is shipped separately and is not pre-installed.

OUTPUT TERMINAL (INSTALLED) – D/I

Made of galvanized steel, it is designed to fit the outlet of a fan with two inlets. It is delivered fully assembled.

OUTPUT SOCKET (NOT INSTALLED) – S/I

Made of galvanized steel, it is designed to fit the outlet of single-inlet fans. It is shipped separately, not pre-installed.

OUTPUT PORT (INSTALLED) – S/I

Made of galvanized steel, it is designed to fit the outlet of single-inlet fans. It is delivered fully assembled.

ENGINE MOUNT TENSION

Made of galvanized steel, it features a pivot-mounted swing arm to make it easier to tighten the gearbox.

SHAFT PROTECTION – S/I

A galvanized omega-shaped component with an opening that allows it to cool, covering the shaft and bearings of one of the intake fans.

FLEXIBLE CONNECTION HM (NOT INSTALLED)

Made of polyester mesh + PVC. Supplied separately, not pre-installed. It can be attached to the front of the air intake on one side and secured with a connecting flange on the opposite side.

FLEXIBLE CONNECTION HM (INSTALLED)

Made of polyester mesh + PVC. It is supplied pre-installed on the front of the motor-fan assembly. It can be attached to the front of the air intake on one side and, using a connecting flange, on the opposite side.

DRAIN VALVE

Made of brass and mounted in the lower part of the fan to facilitate the draining of the condensers.

EXTERNAL grease nipple

An external grease nipple used to lubricate bearings. It consists of a PVC tube with two fittings at each end.

THREE-SPEED MOTOR

Optionally, the TMD series can be equipped with a three-speed motor, an enclosed motor (IP54), a 4- or 6-pole single-phase motor, insulation class F, with an integrated junction box and seal box.

SET OF SUPPORT LEGS

Made of galvanized steel with stamped reinforcements, it is equipped with screws and rubber anti-vibration pads.

EPOXY PAINT

The body, propeller, frame, and deflector are finished with a highly durable and resistant epoxy paint and a high-performance epoxy varnish.

SHAFT END PROTECTION

Metal guard painted with RAL 3000 epoxy, which prevents contact with the shaft.

REVIEW BY JAAN

Made of galvanized steel, with 4 different mounting positions.

SINGLE-PHASE SPEED CONTROLLER

It controls the speed and torque of AC motors by converting the physical values of frequency and line voltage into infinitely variable quantities, while maintaining a constant ratio between them. Designed for single-phase motor-driven fans.

INPUT CONNECTOR (NOT INSTALLED)

Made of galvanized steel in accordance with the UNE 100250 standard. Supplied separately, not assembled.

INLET VALVE (INSTALLED)

Made of galvanized steel in accordance with the UNE 100250 standard. Supplied fully assembled.

SHAFT SEAL – S/I

Discs made of aluminum and a special resin to prevent particles or corrosive elements from entering the intake fans.

ENGINE SUPPORT CLASS

Made of galvanized steel, this allows the motor to be mounted directly onto the housing. It comes with a tensioner, a rubber guard, and screws.

FLOATING ENGINE MOUNT

Made of galvanized steel, it allows for adjustment of the gearbox and motor. Available in three sizes for motors with frame sizes ranging from 63 to 180.

FAQ

See also these products

All Products