Radioactivity Meter with a measuring range of ±60 kV DC / Battery status display / Simple operation / Earthing cable with alligator clip / Alignment via two lasers / For mobile use / Temperature and humidity measurement of the environment
An electrostatic measurement is particularly important to check whether surfaces, components or the human body are electrostatically charged. If a discharge occurs, electronic components can be damaged. In the worst case, flames can form with flammable gases and liquids. Such electrostatic charges can be found with the radioactivity meter. The radioactivity meter is therefore used for checking in ESD-protected production workshops. The measuring range of the radioactivity is ±60 kV DC.
The radioactivity meter can be grounded with the alligator clip included in the scope of delivery so that the radioactivity meter does not lose its measurement result itself or, if necessary, damage components in a production workshop due to an electric shock. The lasers on the radioactivity meter are used to optimally align the sensors.
In addition to measuring radiation, the radioactivity meter can measure ambient temperature and humidity at the same time. For mobile use, the radioactivity meter is operated with a 9 V block battery. The operating time for the radioactivity meter is a maximum of 20 hours. The current battery charge is displayed by the radioactivity meter via the battery status indicator.
Highlights
- Battery life of a maximum of 20 hours
- Measuring range ±60 kV DC
- Acoustic signal when the measured value is exceeded
- Temperature and humidity display
- Laser for aligning the measuring device
- Easy to read display
Technical specifications
Electromagnetic field Measuring range±60 kV DC Resolution±20 kV DC: 0.01 kV DC -60 … -20 kV DC / +20 … +60 kV DC: 0.1 kV DC Accuracy±5 % of measured value Temperature Measuring range-40 … 123.8 °C / -40 … 254.8 °F Resolution 0.1 °C Accuracy±1.5 °C Humidity Measuring range 0 … 100 % RH Resolution 0.1 % RH Accuracy±4.5 % RH Further specifications Response time<100 ms Acoustic alarm when switching on the measuring device, 5 seconds before the automatic shutdown, when the measuring range is exceeded Automatic shutdown after 5 minutes Power supply 9 V block battery Operating time>20 hours Operating conditions 0 … 40 °C / 32 … 104 °F, 0 … 60% RH, non-condensing Dimensions 123 x 70.4 x 21.5 mm / 4.8 x 2.7 x 0.84" Weight 147 g / 5.1 oz
Delivery scope
1 x Radioactivity Meter PCE-SFS 10 1 x Earthing cable 1 x Carrying bag 1 x 9 V block battery 1 x Instruction manual
