Acceleration Sensor for monitoring the vibration speed / 4 … 20 mA output
MIL-C-5015 connection / 3 … 1500 Hz bandwidth
The Acceleration Sensor has been developed for the continuous monitoring of the vibration speed.The Acceleration Sensor is available in different versions.Depending on the type of vibration sensor, a distinction is made between design and measuring range.The Acceleration Sensor measures the vibration speed in the range of ± 12.7 mm / s or ± 25.4 mm / s in the frequency range between 3 Hz and 1500 kHz.
The measured vibration speed is output as a 4 … 20 mA process current.The Acceleration Sensor is looped through a MIL-C-5015 connector to a controller or process display.Depending on the design, the connection socket is attached to the vibration sensor vertically or horizontally.The Acceleration Sensor can be operated with a voltage of 12 … 24 V DC.
Highlights
- horizontal or vertical installation
- Process signal output
- MIL-C-5015 connector
- M6 process connection
- different measuring ranges
- robust construction
Technical specifications
- Measuring range: ± 12.7 mm / s frequency range 3 … 1500 Hz output 2 conductors 4 … 20 mA sensitivity<5% Shock limit± 1000 g Power supply 12 … 24 V DC in current loop Isolation from ground> 108 ohms Output impedance<100 ohms design Vertical connection Electrical connections Pin A: + 4 … 20 mA Pin B: – 4 … 20 mA Connection type 2 pin MIL-C-5015 operating temperatur-40 … 85 ° C Dimensions Ø22 x51 Mounting thread M6
Delivery scope
- 1 x Acceleration Sensor PCE-PVS 10
- 1 x MIL-C 5015 plug to 5 m cable
- 1 x instruction manual
