Coating thickness gaugePCE-CT 100N Surface tester for ferrous and non-ferrous metals / Very compact size / Non-destructive, precise measurements / Data transmission via USB and Wifi / Simple operation / Uncomplicated and reliable
The surface tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the surface tester are used for the non-destructive testing of materials. The surface tester is used to measure the thickness of magnetically neutral layers on a magnetic or non-magnetic base material.
The surface tester is ideal for reliable layer thickness measurements on site. With the external probe, the layer thickness can be measured quickly and easily, even in hard-to-reach places. The surface tester was developed for non-destructive, fast and precise layer thickness measurements and is easy to use. Measured data can be easily transferred to a PC using a USB data storage device or via WiFi.
The surface tester is used in particular in the finishing industry, electroplating, ship and bridge construction, aircraft construction and the machine and chemical industry.
Highlights
- Illuminated touch keyboard
- Measurement data storage for up to 1260 data
- One-point and multi-point calibration
- Single measurement and continuous measurement
- Data transfer via wifi and USB
- Two different probes for NFe and Fe
Technical specifications
- Layer thickness — Measuring range: 0 … 99,9 µm
- Layer thickness — Resolution: 0,1 µm
- Layer thickness — Accuracy: ±(1% +1 µm)
- Layer thickness — Measuring range: 100 … 1250 µm
- Layer thickness — Resolution: 1 µm
- Layer thickness — Accuracy: ±(1% +1 µm)
- Sensor: Designation SP-PCE-CT 100N-F
- Sensor — Battery: type Eddy current mode (NFe)
- Sensor: Min. measuring surface 10 mm
- Sensor: Min. layer thickness 50 µm
- Sensor: Min. radius of curvature convex 15 mm
- Sensor: Min. radius of curvature concave 15 mm
- Sensor: Cable length 100 cm
- Sensor: Dimension 55 x 15 mm / 2.2 x 0.6 in
- Sensor: Designation SP-PCE-CT 100N-N
- Sensor — Battery: type Magnetic mode (Fe)
- Sensor: Min. measuring surface 9 mm
- Sensor: Min. layer thickness 50 µm
- Sensor: Min. radius of curvature convex 15 mm
- Sensor: Min. radius of curvature concave 15 mm
- Sensor: Cable length 100 cm
- Sensor: Dimension 50 x 10 mm / 2 x 0.4 in
- General technical data — Measuring functions: MIN, MAX
- Units µm, mils — Display type: LC colour display with backlight
- Units µm, mils — Display size: 2,8 Inch
- Storage medium Internal memory: Memory capacity (additional information)5 memory groups with 252 memory locations each
- Storage medium Internal memory — Interface: WLAN, USB
- Storage medium Internal memory: Automatic power-off 5 min
- Storage medium Internal memory — Calibration: Single point, multipoint
- Storage medium Internal memory — Menu language: English, Chinese, English (GB)
- Storage medium Internal memory — Protection class (device): IP20
- Storage medium Internal memory — (Rechargeable) battery: 2 x 1,5 V AA battery , Alkali-manganese
- Storage medium Internal memory — Capacity: 3000 mAh
- Storage medium Internal memory — Operating conditions: 0 … 50 °C , 20 … 90 % RH
- Storage medium Internal memory — Storage conditions: 0 … 50 °C , 20 … 90 % RH
- Storage medium Internal memory — Dimensions: ( L x W x H )160 x 78 x 35 mm
- Storage medium Internal memory — Weight: 224 g
Delivery scope
- 1 x Coating Thickness Gauge PCE-CT 100N
- 1 x NFe probe
- 1 x Fe probe
- 1 x USB data carrier
- 1 x Reference film set
- 1 x Calibration plate (ferrous)
- 1 x Calibration plate (non-ferrous)
- 2 x 1.5V AA batteries
- 1 x Instruction manual
