Humon H200/250 Ventilation Duct Humidifier
HUMON is an adiabatic ventilation duct humidifier designed for humidifying small and medium-sized spaces, such as residential buildings,
apartments, and offices.
Does not cause condensation in the ventilation ductwork (provided the ductwork does not pass through an unheated cold room with low temperatures)
The HUMON humidifier can release up to 80 liters of water vapor per day—more than any other standalone humidifier—and, most importantly, all of this is achieved through the natural principle of evaporation.
The humidification cartridge humidifies the air flowing through the humidifier with clean, filtered water. It consists of two parts: a water filter and a porous evaporation material made of cellulose and glass fiber.
- Ultrafiltration starting at 0.015 µm
- Increased filter capacity
- High irrigation efficiency
- 5 dB quieter operation on the channel
The Ultrafilter captures particles as small as 0.015 microns from the water, including viruses, bacteria, and sediment. Its increased capacity extends its operational life. The glass-fiber-cellulose foam structure has a high water absorption coefficient and dampens sound, so the entire system operates much more quietly.
This combination of humidifier cartridges ensures clean, humidified air, quiet operation, energy efficiency, and ease of use.
A PTC (positive temperature coefficient) heater raises the temperature of humidified air: the higher the temperature, the more moisture it can hold. It is an electrical device that uses positive temperature coefficient technology.
- Efficient: low energy consumption
- Cost-effective: long-lasting performance
- Safe: no fire hazard
- A sustained rise in temperature
- Adaptive Self-Regulating System
- Low surface temperature
- Integrated Overheating Protection
These heating devices use less electricity than conventional heating elements to produce the same amount of heat. In addition, they are safer because their surface gets less hot, eliminating the risk of fire. Since they are lighter and smaller, PTC heaters are ideal for use in humidifiers.
An ionizer is a device that charges air molecules with ions, thereby improving indoor air quality. The main purpose of air ionization is to purify the air of unpleasant odors, viruses, and bacteria, allowing people to breathe extremely clean and fresh air.
- Damages and destroys up to 97% of pathogens
- Kills viruses and bacteria
- Prevents mold growth
- Eliminates unpleasant odors
Conventional air humidifiers are limited to filtering water, but HUMON purifies not only the water but also the air. The bipolar ionizer built into the humidifier provides a double guarantee that the air entering your rooms is clean. The humidification and ionization functions always work together, so that the rooms in your home are filled only with ionized, clean, and fresh air.
The T1 duct sensor measures relative humidity and temperature in the ducts.
This ensures that the humidifier operates automatically—in response to changes in the environment, the HUMON humidifier adjusts the necessary settings and saturates the air with the required amount of moisture.
The humidifier is controlled based on readings from temperature and humidity sensors. The sensors have external connectors, so there is no need to open them or connect them to the control board.
T3 is a temperature sensor that helps the algorithm determine watering needs while in standby mode.
- Sensitive to temperature changes.
- Exactly.
- Reliable construction.
Monitoring the outdoor air temperature allows the humidifier to ensure optimal humidity control. Outdoor temperature data can be used to develop energy-efficient humidification strategies and to adjust the humidifier’s operation based on temperature, thereby avoiding unnecessary costs.
The T4 exhaust air sensor measures the relative humidity and temperature in the room.
This ensures that the humidifier operates automatically—in response to changes in the environment, the HUMON humidifier automatically adjusts the necessary settings and fills the rooms with air at the required humidity level.
- Once the desired indoor humidity level has been reached, the controller reduces the need for humidification or stops it entirely.
- The humidifier is controlled based on readings from temperature and humidity sensors.
- The sensors have external connectors; there is no need to open the sensors and connect them to the control board.
An extremely comfortable job
One-Click Service
When using standard portable humidifiers, you risk contaminating your home with bacteria and unwanted microorganisms. Even daily maintenance does not guarantee that such a humidifier is completely clean and that your home is safe.
Why do people feel refreshed and rejuvenated after breathing the air of the Alps or the Himalayas, and why do people who live in the mountains live longer? It’s because of the higher concentration of ions in the air! Experience it in your own home.
Your body will thank you for it over the next ten, twenty, or more years. Invest in your well-being with HUMON.
Humidification is based on natural evaporation processes. A power source, water connection, and drain are required for installation of the unit. The unit must be installed in the supply air duct of the ventilation system, between the ventilation unit and the rooms being supplied with air. The purpose of the HUMON unit is to ensure continuous humidification of the supply air in the ventilation system. The air passing through the unit becomes humidified and slightly cooled thanks to the adiabatic humidification process. The HUMON humidifier features an integrated water filter to purify the water and remove bacteria. An ionization unit helps purify the supply air of viruses and bacteria. All integrated components ensure the unit’s safe and reliable operation. The HUMON humidifier is made of steel coated with aluminum zinc (corrosion class C4-M/C3-H). The unit can be installed in rooms with a temperature range of +5 to +40°C.
SAFETY AND CONNECTIVITY FEATURES
PTC heater with automatic overheating protection
• Airflow sensor for humidifier start/stop
• Additional dry contact
• 0–10 V external trigger input
• Option to connect a pressure switch for airflow indication
• Option to connect an external humidity controller
• External exhaust air humidity sensor T4
TECHNICAL SPECIFICATIONS 200
Dimensions: 363 x 275 x 354 mm
Connection opening dimensions: Ø200 mm
Humidification capacity: 0–3.2 L/h
Power supply: 230 V/50 Hz
Rated current: 8.1 A
Rated power: 1100 W
Power consumption: 6.5 W in standby mode, 10 W for humidification and ionization, 600–1200 W for heating
Water consumption: 0–4.5 L/h
Inlet connection: ¾” internal threaded connection with a 4mm adapter
Drain connection: ½-inch threaded adapter for a 16-mm spiral drain pipe
Airflow: 80–500 m³/h
Weight: 9.5 kg
Water hardness: < 8.5 dGH, 5 mg-eq/l, TDS < 350 ppm
TECHNICAL SPECIFICATIONS 250
Dimensions: 415 x 345 x 354 mm
Connection opening dimensions: Ø250 mm
Humidification capacity: 0–4.8 L/h
Power supply: 230 V/50 Hz
Rated current: 12.1 A
Rated power: 1400 W
Power consumption: 6.5 W in standby mode, 10 W for humidification and ionization, 600–1200 W for heating
Water consumption: 0–4.5 L/h
Inlet connection: ¾” internal threaded connection with a 4mm adapter
Drain connection: ½-inch threaded adapter for a 16-mm spiral drain pipe
Airflow: 200–700 m³/h
Weight: 11.7 kg
Water hardness: < 8.5 dGH, 5 mg-eq/l, TDS < 350 ppm
BENEFITS
• Quiet operation. The humidifier’s components reduce the noise level of the supply air
• The supply air is humidified to a relative humidity of 75%. (Humidification intensity depends on the outdoor air temperature and humidity in the ventilation duct)
• The built-in PTC air preheater ensures the conditions for an adiabatic humidification process
• Touch-sensitive control panel for convenient parameter adjustment
• Integrated water filter for removing bacteria
• Ionization device for purifying the air of viruses and bacteria
• Removable stainless steel drain tray
• Control knob with locking mechanism for easy maintenance
Factors affecting indoor air humidity:
• Outdoor air humidity and temperature
• Supply air volume
• Relative humidity and temperature of the supply air
• Interior finish and furniture materials
• Ventilation system performance characteristics
• Water temperature
The device is available in right-hand or left-hand versions.
