AirgoClean 200 E Air Purifier
For intelligently managed cleaning operations
Indoor air quality can have both positive and negative effects on our well-being, productivity, and, above all, our health. The AirgoClean ® 200 E ensures clean air in rooms up to 66 m². In convenient automatic mode, the air purifier automatically mitigates health risks present in your environment.
Combined fine dust and air quality monitor with real-time PM2.5 display
In addition to manual control of the three-stage air purification process, the AirgoClean® 200 E features a convenient automatic mode. Highly sensitive “air quality sensors” measure indoor air quality and fine dust levels in real time.
You can count on the reliability of the AirgoClean® 200 E
Highly sensitive air quality sensors measure exposure to fine dust and gaseous pollutants (VOCs). Even the slightest changes are detected immediately—so that the system can respond instantly with customized air purification. The unit’s airflow and filter performance are regulated fully automatically to the extent necessary to remove suspended particles from the room air as quickly as possible.
| Virus filtration for SARS-CoV-2 and general protection against infections (flu, colds, measles, etc.) |
HEPA | |
|---|---|---|
| 6 air changes per hour, suitable for rooms up to | Maximum | 36 m ² / 91 m ³ |
| Troteci’s recommendation * | 18 m ² / 45 m ³ | |
| 10 air changes per hour, suitable for rooms up to | Maximum | 22 m ² / 55 m ³ |
| Troteci’s recommendation * | 11 m ² / 28 m ³ | |
| CADR Values | ||
| Fine dust, pollen, pet dander (CADR) | Maximum | 66 m ² / 165 m ³ |
| Troteci’s recommendation * | 32 m ² / 80 m ³ | |
* In advertisements, the maximum value is usually promoted as the “recommended room size.” To achieve a good balance between air pollution control and background noise, our recommended room sizes are based on a noise level of approximately 38 dB(A).
Auto Mode and Virus Filtering:
Do not use Auto Mode when the device is being used for virus filtering. The built-in sensors only respond to air pollutants such as fine dust, pollen, or volatile organic compounds. The device cannot determine the viral load. It is possible that automatic mode will indicate “good” air quality even though the viral load in the room is very high. Therefore, when filtering viruses to reduce the risk of indirect transmission, we recommend always setting the fan speed to meet the applicable air change rate (air volume) requirements.
Impressive comfort features: more than you’d expect
AirgoClean Designer Air Purifier ® 200 E air purifier combines outstanding design, powerful 3-in-1 HEPA filter technology, and convenience that simply makes you happy—and in this class of devices, it’s available exclusively with the AirgoClean ® series of air purifiers.
Light Detection with Automatic Airflow Control
When the ambient light dims—for example, when the lights are turned off or as twilight sets in—the digital display turns off and the ventilation level is reduced to ensure a quiet sleeping environment.
Filter Replacement and Cleaning Indicator
Two five-level bar graphs provide information on the contamination levels of the pre-filter and the HEPA/carbon filter. As soon as the two pre-assembled HEPA/carbon filters need to be replaced or the pre-filters need to be cleaned, a warning message (“Replace” or “Clean”) appears on the digital LED display.
Timer with automatic shut-off
The easy-to-program timer allows you to set a specific operating time. You can set the number of hours until automatic shutdown to 12, 24, 48, or 72 hours. Just as your work-life balance requires—you can also avoid unnecessary operating times.
Memory Function
After a power outage, the selected operating mode and fan speed settings are saved. The timer settings are not saved.
Night mode, reduced ventilation level, and low background noise
The noise-reduced night mode, combined with the deactivated air quality display, ensures clean, filtered indoor air even while you sleep. The airflow is automatically adjusted to meet the requirements for healthy sleep, and the air output is set to the lowest ventilation level.
Dual 3-in-1 HEPA filter technology with ionization for a healthy indoor environment
Thanks to the combined filter system featuring HEPA carbon and DACRON filter technologies, along with additional ionization, fine dust particles, allergens, and other pathogens are reliably filtered out of the indoor air.
2-way HEPA filter (99.97%)
Viruses, bacteria, pollen, allergens, fine dust particles, and mold spores up to 0.3 micrometers in size are removed by two HEPA filters. Due to their high filtration efficiency of 99.97%, filters of this class are used, for example, in hygiene-sensitive laboratory spaces and in food production. The best conditions for turning your own four walls into an oasis of clean, filtered, fresh air.
Dual carbon filter (activated carbon filter)
This additional carbon filter, made of carbon, is ideal for all smokers. In addition to pollutants, this activated carbon filter effectively neutralizes the odors of tobacco, pets, kitchen smells, smoke, as well as formaldehyde and solvent odors from outdoor air. For clean air—free of unpleasant odors.
2 DACRON ® pre-filters
DACRON® is the name given to filaments made from synthetically produced polyester, which, thanks to their particularly hypoallergenic properties, are ideally suited for use as pre-filters in air purification systems. Pre-filters made from this synthetic fiber are particularly tear-resistant, durable, and water-repellent. A synthetic-fiber filter reliably removes light to moderate odors, coarse household dust, and pet hair from indoor air.
ionization
The filter’s already high performance is enhanced by fully automatic ionization. This releases negatively charged ions, whose static charge binds airborne pollen, dust, viruses, and bacteria, causing them to settle to the floor, where they are then immediately drawn in and removed by the airflow from the four-stage fan. This cleans the indoor air even more effectively and also enriches it with active oxygen.
Quick and easy filter replacement
Replacing the pre-assembled filters is just as easy as using the AirgoClean® 200 E. The device’s covers can be removed from both sides with a single hand movement and without tools, allowing you to visually inspect the pre-filter and HEPA filter and replace them as needed.
- Red Dot Design Award Winner
- High-quality design made of brushed stainless steel with rounded corners
- Multi-stage room air filtration system with a DACRON® pre-filter, a combined HEPA/carbon filter (99.97%), and ionization
- Highly effective HEPA filtration for fine dust particles, airborne particles, pollutants, germs, and odors
- Combined air quality display with LED colors and a real-time reading of fine particulate matter (PM 2.5)
- Suitable for fully automatic air purification in rooms up to 66 m² or 165 m³
- Maximum treatment capacity: 550 m³/h
- 4 fan speeds
- 3 operating modes: automatic mode, turbo mode, night mode
- Compact and powerful, easy to use
- Quick and easy filter replacement
- Light Detection
- Timer Function
- Memory Function
- Filter indicator lights
- Night Mode (Reduced Noise)
- Low energy consumption
- Hypoallergenic
| Air volume | ||
|---|---|---|
| Suitable for rooms up to [m² / m³] | Area: 66 m² / 165 m³ | |
| Level 1 [m³/h] | 179 | |
| Level 2 [m³/h] | 267 | |
| Level 3 [m³/h] | 433 | |
| Level 4 [m³/h] | 550 | |
| Electrical Values | ||
| Power Connection | 220–240 V / 50 Hz | |
| Power consumption [kW] | 0.038 | |
| Rated current consumption [A] | 0.17 | |
| Electrical Connection | ||
| Plug | CEE 7/17 (contour plug) | |
| Cable length [m] | 1.8 | |
| Sound Values | ||
| Level 1 – distance 1 m [dB (A)] | 31 | |
| Level 2 – distance 1 m [dB(A)] | 38 | |
| Level 3 – distance 1 m [dB (A)] | 49 | |
| Level 4 – distance 1 m [dB(A)] | 54 | |
| fan | ||
| radial | ||
| axial | ||
| Fan Speed | 4 | |
| dimension | ||
| Length (without packaging) [mm] | 310 | |
| Width (without packaging) [mm] | 310 | |
| Height (without packaging) [mm] | 680 | |
| weight | ||
| (without packaging) [kg] | 10.5 | |
| EQUIPMENT, FEATURES, AND FUNCTIONS | ||
|---|---|---|
| Interior Design | ||
| Air Quality Sensor (VOC) * | ||
| On/Off Switch | ||
| Digital display | ||
| Touchscreen | ||
| Dust Sensor | ||
| Air Quality Display | ||
| Light Detection Function | ||
| PM2.5 Detection | ||
| Timer Function | ||
| Child Lock / Lock Button | ||
| Ionization | ||
| Turbo Mode | ||
| Automatic Mode | ||
| Night Mode | ||
| dimmable screen | ||
| low ventilation level | ||
| Resetting the Filter | ||
| Memory Function | ||
| Filter Replacement Screen | ||
| Main filter | ||
| Pre-filter | ||
| filter | ||
| Pre-filter | Synthetic fiber | |
| HEPA filters | HEPA carbon filter | |
| Filter efficiency | 99.97% | |
| mobility | ||
| Legs | ||
| Carrying/Transport Handle | ||
