Class 2 Data LoggingNoise Meter / Sound Meter with Sound Calibrator incl. ISO Calibration Certificates Class II sound level meter with octave filter or 1/3 octave filter for frequency analysis / USB interface / Data logger / A, B, C, Z evaluation / Fast, slow and pulse analysis
The class 2 data logging noise meter / sound meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The sound level meter is a class 2 device and is equipped with an octave band frequency filter. The sound level meter can optionally be upgraded with a 1/3 octave band filter. In addition to the numerical display of the measured value, a graph can show the course of the sound level. The sound level meter has various frequency weightings such as A, B, C and Z. The sound meter can also display measurements with the time weightings Fast, Slow, Impulse and Peak. The measuring range of the sound level meter extends from 25 … 136 dbA at a frequency of 20 Hz … 12.5 kHz. 3 different measurement profiles can be stored in the sound level meter. Here the user can decide which parameters the sound level meter should record. For example, you can choose between Laeq, LcPeak, LaFmax, LaFMin, etc.
The peak hold function in the class 2 data logging noise meter / sound meter makes it possible to record the maximum sound pressure level during long-term measurements and freeze it in the display. A 24 bit AD converter and the specially developed electronics of the sound level meter help to reduce the inherent noise to a very low level. Sampling the measurement signal with more than 48 kHz enables high accuracy and improved stability of the measurement value on the sound level meter.
Highlights
- 1/1 octave band included**
- 1/3 octave band optional
- Accuracy class 2
- A, B, C & Z Frequency weighting
- Fast, Slow, Pulse and Peak time weighting
- Statistics function
- Display of the sound curve as a graph
- 3 measurement profiles adjustable
- Low inherent noise
- ICCP microphone 40 mV /PA
- Alarm level adjustable
- incl. calibrator and ISO calibration certificates**
Technical specifications
- Measuring range: 25 … 136 db(A)
- Accuracy: Class 2
- Frequency: range 20 Hz … 12.5 kHz
- Standards GB/T 3785.1-2010
- GB/T 3785.2-2010
- IEC 60651:1979
- IEC 60804:2000
- IEC 61672-1:2013
- ANSI S1.4-1983
- ANSI S1.43-1997
- Frequency: analysis 1/1 Octave band filter: 20 Hz … 8 kHz
- 1/3 Octave band filter: 20 Hz … 12.5 kHz
- Microphone 1/2″ microphone Class 2
- Sensitivity: 40 mV/PA
- Frequency: range: 20 Hz … 12.5 kHz
- Connection: TNC — Power supply: : ICCP Standard
- Connection: TNC: Data-logging interval 1 s … 24 h (adjustable)
- Connection: TNC — Measuring functions: LXY (SPL), LXeq, LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN
- Y = Time weighting: F, S, I: N = Statistics in %: 1 … 99%
- Y = Time weighting: F, S, I — Frequency: weightings A, B, C, Z
- Y = Time weighting: F, S, I: Time weightings Fast (F) 125ms, Slow (S) 1 sec, Impulse (I) 35 ms
- Y = Time weighting: F, S, I: Inherent noise Microphone: 20 db(A), 26 db(C), 31 db(Z)
- Y = Time weighting: F, S, I: Electronics: 14 db(A), 19 db(C), 24 db(Z)
- Y = Time weighting: F, S, I: AD converter 24 Bit
- Y = Time weighting: F, S, I: AD Sample rate Standard: 48 kHz
- Y = Time weighting: F, S, I: LN Mode: 20 ms
- Graphical: Display 160 x 160 pixel LCD with backlight
- Graphical: Memory 4 GB Micro SD card
- Graphical — Interface: USB (Memory readable via software or directly as mass storage)
- Graphical: RS-232
- Graphical: Voltage output AC 5V RMS
- Graphical: DC 10 mV/db
- Alarm Adjustable — Power supply: 4 x 1.5V AA Batteries
- Alarm Adjustable: 12V / 1 A Power plug
- Alarm Adjustable: 5V / 1 A USB
- Alarm Adjustable — Battery: life Min. 10 h continuous use
- Alarm Adjustable — Dimensions: 70 x 300 x 36 mm / 2.76 x 11.81 x 1.42 in (W x H x D)
- Alarm Adjustable — Weight: Approx. 620 g / 1.4 lbs incl. batteries
- Class 2 Sound CalibratorPCE-SC 43: Sound pressure level 94 dB, 104 dB, 114 dB
- Class 2 Sound CalibratorPCE-SC 43 — Accuracy: ±0.4 dB
- Class 2 Sound CalibratorPCE-SC 43: Class 2
- Class 2 Sound CalibratorPCE-SC 43 — Frequency: 1000 Hz for A, B, C and D frequency weighting
- Class 2 Sound CalibratorPCE-SC 43 — Frequency: accuracy±1.7 %
- Class 2 Sound CalibratorPCE-SC 43: Stabilization time 10 seconds
- Class 2 Sound CalibratorPCE-SC 43: Total harmonic distortion<3 %
- Environmental conditions: Temperature influences<0.4 dB at 0 … 40 °C / 32 … 104 °F
- Environmental conditions: Humidity influences 25 … 90 % RH
- Environmental conditions: Atmospheric pressure<0.1 dB at 65 … 108 kPa
- Environmental conditions: Stability at <60 seconds±0.15 dB
- Environmental conditions: Stability after one year±0.35 dB
- (normal use) — Operating conditions: 0 … 40 °C / 32 … 104 °F, <25 … 90 % RH,
- non-condensing — Storage conditions: -20 … 50 °C / -4 … 122 °F, <90 % RH,
- non-condensing: Automatic shutdown after 20 minutes
- non-condensing — Power supply: 2 x 1.5 V AA batteries
- non-condensing — Battery: life ca. 50 hours
- non-condensing: Microphone size 1/2 inch
- non-condensing — Dimensions: 60 x 130 x 37.5 mm / 2.3 x 5.1 x 1.4″
- non-condensing — Weight: 400 g / 14.1 oz
Delivery scope
- 1 x Class 2 Noise Meter / Sound Meter PCE-428
- 1 x 1/2″ microphone class 2
- 1 x Wind noise suppressor (foam ball)
- 1 x USB interface cable
- 1 x Software (free download)
- 1 x Mains power adapter
- 1 x Carrying case
- 1 x Instruction manual
- 1 x Sound calibrator PCE-SC 43
- 1 x ISO calibration certificate for PCE-SC 43 Note: The sound level meter is supplied with a 1/1 octave band filter. An optional 1/3 octave band filter upgrade is available for an additional fee – see accessories. N.B. Calibration certificates are issued specifically for the customer and are excluded from the right of return.
