Crowcon Clip SGD H2S Gas Leak Detector
Crowcon Clip Gas Leak Detector with a 24-month service life / Triple alarm signal / No maintenance or calibration required / Self-test function / Measures hydrogen sulfide
This gas leak detector is a compact and reliable device designed to ensure the safety of factory workers. The gas leak detector has a service life of 2 years and is designed to handle any situation that may arise in an industrial setting. It is worth noting that although the Crowcon Clip+ gas leak detector also has a service life of 2 years, it features an additional standby mode that allows the device to be used continuously for over 3 years.
The measurement parameter that can be detected by the Crowcon Clip Gas Leak Detector is hydrogen sulfide (H2S). The gas leak detector ensures optimal safety thanks to its reliability and the fact that it requires no maintenance. At the same time, the gas leak detector is simple to use, eliminating the need for time-consuming training. Using additional software and an IR link, you can adjust various alarm levels, display measurement data in real time, or interpret and document readings using the integrated IR interface.
The Gas Leak Detector also notifies the user when a gas detection test (bump test) is required. As mentioned earlier, the gas leak detector is designed to handle all conditions that may arise in industrial settings. Measurements can be taken at temperatures ranging from -40 to +50°C and relative humidity levels from 5 to 95%. The gas leak detector features IP 66 and 67 protection ratings and is also very compact, measuring 81 mm x 50 mm x 28 mm / 3.2 x 2 x 1.1 inches.
Highlights
– Self-test function
– 24-month operating time / detection time
– 36 months with Clip+ (with interruptions)
– Visual, audible, and haptic alarms
– Adjustable alarm levels
– Gas level or runtime indicator
– H 2S ( hydrogen sulfide )
– Short training time
Specifications
| Technical Specifications for the Crowcon Clip/Clip+ Carbon Monoxide Detector | |||
| Measurement Ranges and Alarm Levels for the Crowcon Clip Carbon Monoxide Detector | |||
| Gas | Measurement Range Sensor | Alarm 1 | Alarm 2 |
| H2S | 0…100 ppm | 5 ppm | 10 ppm |
| CO | 0…300 ppm | 30 ppm | 100 ppm Second device |
| O 2 | 0 … 30 percent by volume. | 19% vol. | 23.5% vol. Second device |
| General Technical Specifications for the Crowcon Clip/Clip+ Gas Detectors | |||
| Duration of Service | 24 months of continuous operation with Clip 36 months in standby mode with Clip+, if the maximum alarm duration is 4 minutes per day |
||
| Recording Option | |||
| Screen | |||
| Alarm screen Optical Acoustic Haptic |
LEDs on top, bottom, and side 95 dB Vibration |
||
| Self-Test | Every 2 hours after power-on; continuous battery monitoring | ||
| Power Source | Internal battery | ||
| Environmental Conditions H2S |
-40 … +50 °C / -40 … 122 °F / 5 … 95% relative humidity, non-condensing | ||
| Dimensions | 81 x 50 x 28 mm / 3.9 x 2 x 1.1 inches | ||
| Weight | 76 g / < pounds | ||
| Protection Class | IP 66/IP 67 | ||
| Compliance | EMC Directive 89/336/EEC | ||
| Certification | UL-913 & CSA-C22.2 No. 157 Class 1, Divisions 1 and 2, Groups A, B, C, D ATEX II 1G Ex ia IIC T4 Ga IECEx Ex ia IIC T4 |
||
1 x user manual
