Crowcon Clip SGD CO Gas Leak Detector
Crowcon Clip and Clip+ Gas Leak Detectors with a 24- or 36-month service life / triple alarm signal / no maintenance or calibration required / self-test function / CO
This gas leak detector is a compact and reliable device designed to ensure the safety of factory workers. The gas leak detector has a service life of 2 years and is designed to handle any situation that may arise in an industrial setting. It is worth noting that while the Crowcon Clip+ gas leak detector also has a service life of 2 years, it features an additional standby mode that allows the device to be used continuously for over 3 years. The Crowcon Clip gas leak detector is capable of measuring carbon monoxide (CO) levels. The gas leak detector ensures optimal safety thanks to its reliability and the fact that it requires no maintenance. At the same time, the gas leak detector is simple to use, eliminating the need for time-consuming training sessions. Using additional software and an IR link, you can adjust various alarm levels, display measurement data in real time, or interpret and document readings using the integrated IR interface. The Gas Leak Detector also notifies the user when a gas detection test (bump test) is required. As mentioned earlier, the gas leak detector is designed to handle all conditions that may arise in an industrial setting. Measurements can be taken within a temperature range of -40 to +50°C or at relative humidity levels of 5 to 95%. The gas leak detector has IP 66 and 67 protection ratings, and with dimensions of 81 mm x 50 mm x 28 mm / 3.2 x 2 x 1.1 inches, it is very compact.
– Self-test function
– 24-month operating time / detection time
–
36 months with Clip+ (intermittent)
– Visual, audible, and haptic alarms
– Adjustable alarm levels
– Gas level or runtime indicator
– For CO (carbon monoxide)
– Short notification time
| Technical Specifications for the Crowcon Clip/Clip+ Carbon Monoxide Detector | |||
| Measurement Ranges and Alarm Levels for the Crowcon Clip Carbon Monoxide Detector | |||
| Gas | Measurement Range Sensor | Alarm 1 | Alarm 2 |
| H2S | 0…100 ppm | 5 ppm | 10 ppm Another model |
| CO | 0…300 ppm | 30 ppm | 100 ppm |
| O 2 | 0 … 30 percent by volume. | 19% vol. | 23.5% vol. Another model |
| General Technical Specifications for the Crowcon Clip/Clip+ Gas Detectors | |||
| Duration of Service | 24 months of continuous operation with Clip 36 months in standby mode with Clip+, if the maximum alarm duration is 4 minutes per day |
||
| Storage Capacity | Up to 1 year before first activation | ||
| Display | LCD, remaining battery life, gas level, and additional information | ||
| Alarm screen Optical Acoustic Haptic |
LEDs on top, bottom, and side 95 dB Vibration |
||
| Self-Test | Every 2 hours after power-on; continuous battery monitoring | ||
| Power Source | Internal battery | ||
| Environmental Conditions H2S CO O2 |
-40 … +50 °C / -40 … 122 °F / 5 … 95% relative humidity, non-condensing -40 … +50 °C / -40 … 122 °F / 5 … 95% relative humidity, non-condensing -35 … +50 °C / -31 … 122 °F / 5 non-condensing … |
||
| Dimensions | 81 x 50 x 28 mm / 3.9 x 2 x 1.1 inches | ||
| Weight | 76 g / < pounds | ||
| Protection Class | IP 66/IP 67 | ||
| Compliance | EMC Directive 89/336/EEC | ||
| Certification | UL-913 & CSA-C22.2 No. 157 Class 1, Divisions 1 and 2, Groups A, B, C, D ATEX II 1G Ex ia IIC T4 Ga IECEx Ex ia IIC T4 |
||
Scope of Delivery
1 x user manual
