TFV 30 Turbo Centrifugal Fan, 2200 m³/h

TFV 30 Turbo Fan, 2200 m³/h

Equipped with a double-flow centrifugal fan featuring an extra-large special shaft and specially shaped air outlet channels, it significantly increases the drying rate. The room air is optimally distributed via a wide airflow generated near the floor, which is particularly effective for damp screeds or wet floor coverings.

Especially when it comes to cleaning carpets, accelerated drying offers a decisive advantage—in addition to saving time: natural fibers warp significantly less, and the formation of waves is prevented.

Compared to standard turbo fans, the TFV 30 delivers 10 percent higher airflow and 30 percent higher pressure while consuming 30 percent less energy. The dual meter installed as standard provides information on operating hours and energy consumption.

Of course, the energy released also requires a good grip. Thanks to the all-around slip-resistant treads, this is always the case—even at full power and, of course, in any of the three adjustable mounting positions. After a drive in a classic car, the floor can be dried without any worries.

All functions are housed in an eye-catching cuboid design. Storage and transport are convenient and space-saving—the turbo fan can even be stacked. With an integrated cable holder, a handy handle, rubber pull tabs, and a recessed control panel, the housing naturally offers additional advantages in terms of transport and storage, as well as convenience and safety.

Benefits of exercise:

• Development, design, manufacturing: 100% Trotec
• A sturdy yet lightweight polyethylene construction
• Double-flow centrifugal fans with an extra-large special shaft
• Circumference-based, non-slip runners
• Multi-stage blower
• Can be used and stored in various angles
• High energy efficiency, so it’s just as powerful and energy-efficient
• Stackable
• Motor with high-quality ball bearings – no one-sided load on the shaft
• German industrial design optimized for practical use – registered design
• MID-compliant dual meter for operating hours and energy consumption

• Where to use:
  Thorough drying of wet floors, carpets, and floor coverings
  Drying buildings after a flood
  Renovation work
  Construction sites

Technical Specifications:

• Airflow, Stage 1: 1,600 m³/h
• Air flow rate, Stage 2: 1,850 m³/h
• Airflow Stage 3: 2200 m³/h
• Airflow: blows out
• Fan speeds: 3
• Maximum air pressure: 425 Pa
• Maximum conveyor temperature: 60°C
• Mains voltage: 230 V / 50 Hz
• Power consumption: 0.85 kW
• Plug type: CEE 7/7
• Cable length: 4 m
• Required fuse rating: 10 A
• service port
• Dual-purpose meter for operating hours and energy consumption (MID-compliant)
• Sound Level (at a distance of 3 m) Level 1: 73.5 dB(A)
• Sound Level (at a distance of 3 m) Level 2: 80.8 dB (A)
• Sound Level (at a distance of 3 m) Level 3: 86.2 dB(A)
• Portability: portable / stackable
• Protection rating: IP22
• Dimensions (W x L x H): 442 x 426 x 429 mm
• Weight: 18.5 kg