TDS 30 Electric Heat Blower
Unlike direct-burn gas or oil-fired heating devices, the TDS series electric heaters do not consume oxygen or produce combustion gases, which means they can be used virtually anywhere. Electric heaters are particularly well-suited for regulating the temperature in unheated indoor spaces.
The option to hang it on a wall or mount it from the ceiling opens up a wide range of possible uses, such as heating construction trailers, market stalls, greenhouses, small halls, garages, workshops, boathouses, or assembly areas.
Thanks to the integrated thermostat control, the hot air flow generated by all TDS models can be continuously regulated to the desired temperature.
TDS electric heaters (except for the TDS 10) can be used in fan mode without the heating function and feature multi-stage power control for demand-based regulation of heating output to maintain optimal temperature.
Benefits of an internship:
- 100% TROTEC – Development, Design, Manufacturing
- Multi-stage temperature control
- Integrated thermostat for a continuous flow of hot air
- Overheating Protection
- 10% more power compared to competing models (5.5 kW)
- Fan motor with thermal protection
- Condensation-free heat—no oxygen consumption—making it ideal for heating the cabin
- Can be mounted on a wall or ceiling—a bracket is available as an optional accessory
- Air panel installed as standard to optimize heat dissipation (ensures maximum efficiency)
- Fan activation feature for cooling components
Possible applications (electric heater)
- Construction Container
- Garages
- gastronomy
- Greenhouses
- Market Stalls
- Warehouses and Work Areas
- Boathouse
- workshops
- Shipbuilding
- and many others…
Technical details of the TDS 30 electric heater at a glance:
- Heating Level 1: Fan Only
- Heating capacity level 2: 2.75 kW
- Heating capacity level 3: 5.5 kW (max 4,730 kcal)
- Air volume: 458 m³/h
- Fan speed: 1
- Power consumption: 7.22 A.
- Line voltage: 400 V / 50 Hz
- Power connection: CEE 16 A, 5-pin
- Connection cable: built-in (1.6 m long)
- Thermostat: built-in
- Portability: portable
- Noise level: 46 dB (A)
- Overheating protection: yes
- Protection Class: IPX4
- Dimensions (L x W x H): 270 x 255 x 400 mm
- Weight: 5.6 kg
Note: (Cool) air is drawn in through the back of the electric heater, heated, and then blown out as warm air. This gradually and evenly raises the room temperature over time. Since a large volume of air is drawn in and blown out, the air that comes out doesn’t feel particularly hot! However, due to the high airflow, the entire room warms up gradually.
| heating capacity | ||
|---|---|---|
| Stage 1 [kW] | 0 | |
| Stage 2 [kW] | 2.75 | |
| Level 3 [kW] | 5.5 | |
| Maximum Level [kcal] | 4,730 | |
| Air volume | ||
| Max. flow rate [m³/h] | 458 | |
| Rise in temperature | ||
| [°C] | 87 | |
| Workspace | ||
| Minimum temperature [°C] | -20 | |
| Maximum temperature [°C] | 45 | |
| Fans | ||
| axial | ||
| radial | ||
| Number of fan speeds | 1 | |
| Electrical Values | ||
| Power Connection | 400 V / 50 Hz | |
| Rated current [A] | 8. | |
| Recommended protection [A] | 10 | |
| Power consumption [kW] | 5.5 | |
| Electrical Connection | ||
| Plug | CEE 16 A, 5-pole | |
| on the client side | ||
| Cable length [m] | 1.35 | |
| Sound Values | ||
| Distance 1 m [dB (A)] | 51 | |
| Hose Connection | ||
| Hose Connection | ||
| dimension | ||
| Length (without packaging) [mm] | 270 | |
| Width (without packaging) [mm] | 255 | |
| Height (without packaging) [mm] | 400 | |
| weight | ||
| (without packaging) [kg] | 6 | |
| EQUIPMENT, FEATURES, AND FUNCTIONS | ||
|---|---|---|
| service | ||
| Fan On Function | ||
| mobility | ||
| Carrying/Transport Handle | ||
