TDS 20 Electric Fan Heater, up to 3.3 kW
10% more power than competitors
Unlike direct-heating gas or oil-fired heaters, the TDS series of electric fan heaters do not consume oxygen or produce combustion fumes, which allows them to be used virtually anywhere. Electric heaters are particularly well-suited for regulating the temperature in unheated indoor spaces.
The option to hang it on a wall or mount it from the ceiling opens up a wide range of possible uses, such as heating construction trailers, market stalls, greenhouses, small halls, garages, workshops, and boathouses, or for assembly work. .
Thanks to the integrated thermostat control, the flow of hot air generated by all TDS models can be adjusted in increments to the desired temperature.
TDS electric heaters (except TDS 10) can be used in fan mode without the heating function and feature multi-stage power control to adjust the heating output as needed for optimal temperature regulation.
Practical Benefits:
- 100% TROTEC – Development, Design, Manufacturing
- Multi-level temperature control
- Built-in thermostat for a continuous flow of warm air
- overheating protection
- 10% more power compared to competitors’ models (3.3 kW)
- Fan motor with thermal protection
- Condensation-free heat—does not consume oxygen—making it ideal for heating the cabin
- Can be mounted on a wall or ceiling—a mounting bracket is available as an optional accessory
- Standard built-in air gap to optimize heat dissipation (ensures maximum efficiency)
- fan function
Possible applications:
- construction container
- garages
- gastronomy
- greenhouses
- market stalls
- warehouses and workshops
- boathouse
- workshops
- shipbuilding
- and many others…
Technical details of the TDS 20 electric heater at a glance:
- Heat Output Stage 1: Fan Only
- Heat output level 2: 1.65 kW
- Heat output level 3: 3.3 kW (max 2,840 kcal)
- Airflow: 335 m³/h
- Fan speeds: 1
- Current consumption: 14.3 A
- Mains voltage: 230 V / 50 Hz
- Power connection: safety plug (CEE 7/7)
- Connection cable: built-in (1.35 m long)
- Thermostat: built-in
- Portability: portable
- Sound level: 46 dB (A)
- Overheating protection: yes
- Protection rating: IPX 4
- Dimensions (W x L x H): 255 x 265 x 395 mm
- Weight: 5.3 kg
Note: (Cold) air is drawn in from the back of the electric heater, heated, and then blown out again as warm air. This raises the room temperature evenly over time. Since a large volume of air is drawn in and blown out, the air that comes out doesn’t feel particularly hot! However, due to the high airflow, the entire room is heated gradually.
| Heating capacity | ||
|---|---|---|
| Level 1 [kW] | 0 | |
| Stage 2 [kW] | 1.65 | |
| Stage 3 [kW] | 3.3 | |
| Max Level [kcal] | 2840 | |
| air volume | ||
| Max. flow rate [m³/h] | 335 | |
| rise in temperature | ||
| [°C] | 85 | |
| Workspace | ||
| Minimum temperature [°C] | -20 | |
| Maximum temperature [°C] | 45 | |
| fans | ||
| axial | + | |
| radial | – | |
| Number of fan speeds | 1 | |
| electrical values | ||
| Power connection | 230V/50Hz | |
| Rated Current [A] | 14.4 | |
| Recommended protection [A] | 16 | |
| Power consumption [kW] | 3.3 | |
| electrical connection | ||
| plug plug | CEE 7/7 | |
| client side | ||
| Cable length [m] | 1.35 | |
| sound levels | ||
| Distance 1 m [dB(A)] | 46 | |
| dimension | ||
| Length (without packaging) [mm] | 265 | |
| Width (without packaging) [mm] | 255 | |
| Height (without packaging) [mm] | 395 | |
| weight | ||
| (without packaging) [kg] | 5 | |
| EQUIPMENT, FEATURES, AND FUNCTIONS | ||
|---|---|---|
| Mobility | ||
| Carrying/transport handle(s) | ||
