PCE-TDS+ 200 SML-ICA Ultrasonic Pipe Flow Meter, including ISO calibration certificate
Ultrasonic pipe flow meter with 32 GB of data storage / measurement range ±32 m/s /
Repeatability ±0.5% of measured value / Various measurement probes / Alarm limits /
2.8-inch LCD screen / suitable for all media
The measurement range of the ultrasonic flowmeter is ±32 m/s. The ultrasonic flowmeter has an accuracy of ±1.5% fs for pipe diameters DN ≥50, and ±3.5% fs for pipe diameters DN <50, and a repeatability of ±0.5% fs, making it a particularly accurate measuring device. An installation aid is available for mounting the ultrasonic flowmeter’s sensors. The installation aid graphically displays the signal quality of the ultrasonic flowmeter. It also graphically indicates whether the ultrasonic flowmeter sensors are at the correct distance from each other. To measure flow rate with the ultrasonic flow meter, the flow velocity, flow rate, and volume are displayed after entering the pipe and environmental specifications. The ultrasonic flow meter displays measured values in many units. For example: m³, l, gal, igl, mgl, cf, bal, ib, and ob.
During measurement, the measured values can be saved using the ultrasonic flowmeter’s data logger function. The start and stop conditions for the ultrasonic flowmeter, as well as the recording interval, can be set within a range of 1 second to 12 hours. The ultrasonic flowmeter’s memory stores all measured values once. The measured values are stored in the ultrasonic flow meter’s 32 GB built-in memory. The ultrasonic flow meter can store up to 10 million measurement points.
The optional software allows you to read the recorded measurement values from the ultrasonic flowmeter. For analysis, the measured values from the ultrasonic flow meter can be displayed in tabular and graphical formats. To further process the measured values from the ultrasonic flow meter, they can be exported in .csv file format. Alternatively, a PDF report can be generated using the software. To simplify operation, the ultrasonic flow meter can be configured via the software. The software also allows for a live view of the measured values from the ultrasonic flow meter.
Two additional thermocouples are required to determine the heat flux using an ultrasonic flowmeter. These are included with the PCE-TDS 200+. The ultrasonic flow meter’s two thermocouples are connected to the flow and return lines of the piping system. Based on the temperature difference and the measured flow velocity, the ultrasonic flow meter can determine the heat quantity. If necessary, the ultrasonic flow meter can simultaneously calculate and display costs per unit of heat during measurement. This is how the ultrasonic flow meter is used, for example, to monitor heating systems.
The LC color display on the ultrasonic flow meter is 2.8 inches and is therefore easy to read.
PCE-TDS 200 S SENSOR
A small sensor pair for pipe diameters DN 15 … 100 / 20 … 108 mm. Particularly suitable for small pipes. The sensors are exceptionally compact, measuring 45 x 30 x 30 mm, and have a temperature range of -30 to 160 °C. Thanks to magnets on the underside, the sensors can be mounted on ferrous metals. In addition, the ultrasonic flowmeter sensors can be connected to the pipe using detachable cable clamps.
PCE-TDS 200 M SENSOR
Medium-sized sensor pair for pipe diameters DN 50 … 700 / 57 … 720 mm. Suitable for measuring flow in medium-sized pipes. The ultrasonic flowmeter sensors have built-in magnets that allow them to be attached to black pipes. Alternatively, the sensors can be attached to the pipe using removable cable ties. The temperature range is -30 to 160 °C.
PCE-TDS 200 L SENSOR
Large sensor pair for pipe diameters DN 300 … 6000. 6000. Therefore, this sensor pair is particularly suitable for large pipes. The sensors can be attached to the Clamp-on Ultrasonic Flow Meter using detachable cable ties. Thanks to built-in magnets, the sensors can be attached to ferrous metal pipes. The sensors measure 91 x 52 x 44 mm.
ACCESSORIES: (VAT is added to the prices)
Highlights
| Current Measurement | |
| Measurement range | ±32 m/s |
| Accuracy | 0.001 m/s |
| Accuracy | DN ≥50 mm: ±1.5% of reading at flow rates of > 0.3 m/s |
| DN <50 mm: ±3.5% of reading at speeds of > 0.3 m/s | |
| Reproducibility | ±0.5% of the measured value |
| PCE-TDS 200 S SENSOR | Pair of sensors |
| Pipe diameter | DN 15 … 100 / 20 … 108 mm |
| Temperature Resistance | -30 … 160 °C |
| Dimensions | 45 x 30 x 30 mm |
| PCE-TDS 200 M SENSOR | |
| Pipe diameter | DN 50 … 700 / 57 … 720 mm |
| Temperature Resistance | -30 … 160 °C |
| PCE-TDS 200 L SENSOR | |
| Pipe diameter | DN 300 … 6000 mm |
| Dimensions | 91 x 52 x 44 mm |
| Measurement Method | Z, V, N, W |
| Average | – water |
| – seawater | |
| – oil | |
| – crude oil | |
| – methanol | |
| – ethanol | |
| – diesel | |
| – gasoline | |
| – oil | |
| – user-defined | |
| (Manual entry of the speed of sound from the carrier) | |
| All liquids containing additives | <5% |
| Pipe material | – copper (CU) |
| – steel FE | |
| – VA stainless steel | |
| – aluminum (AL) | |
| – brass ME | |
| – cast iron CI | |
| – iron FE | |
| – nickel NI | |
| – titanium TI | |
| – zinc ZI | |
| – Acrylic AC | |
| – polyethylene (PE) | |
| – polypropylene (PP) | |
| – polyvinyl chloride (PVC) | |
| – nylon NY | |
| – user-defined | |
| (Manual entry of the transverse sound speed | |
| (made of pipe material) | |
| Pipe inner lining | – no lining |
| – user-defined | |
| – epoxy resin | |
| – rubber | |
| – mortar | |
| – polystyrene (PS) | |
| – polyethylene (PE) | |
| – polytetrafluoroethylene (PTFE) | |
| – polyurethane (PU) | |
| – polypropylene (PP) | |
| – user-defined | |
| (Manual entry of the longitudinal speed of sound) | |
| (the pipe’s inner lining) | |
| Measurement Parameters | flow velocity, volumetric flow rate, and volume |
| Units (dimensions) | mm, in |
| Units (flow velocity) | m/s, ft/s |
| Units (volume flow) | m³, l, gal, igl, mgl, vrd, bal, ib, ob |
| Time Specification | seconds, minutes, hours, days |
| Units (volume) | m³, l, gal, igl, mgl, vrd, bal, ib, ob |
| Additional Specifications | |
| 2.8″ LCD | 2.8″ LCD |
| Menu | metric / imperial |
| Menu Languages | German, English, French, Spanish, |
| Italian, Dutch, Portuguese, Danish, Turkish, Polish, German | |
| Turkey, Poland, Russia, China, Japan | |
| Operating and Storage Conditions | Temperature: -20 to +65 °C |
| Humidity: 10 … 95% relative humidity, non-condensing | |
| Data Logger | 32 GB storage capacity / 10 million data points |
| Uninterface | USB (for online measurement, internal memory display) |
| (for memory and battery charging) | |
| Protection Class | IP52 |
| Internal Power Source | Internal: LiPo battery (3.7 V, 2500 mAh) |
| External: USB 5 VDC, 500 mA | |
| Working hours | approx. 10 hours |
| Dimensions | 165 x 85 x 32 mm |
| Weight | 255 g |
Scope of Delivery
1 x flow sensor PCE-TDS 200 L SENSOR (pair)
1 x ISO calibration certificate
