Wind Speed Alarm / Wind Alarm Controller / pre-alarm and alarm / RS485 interface / wind speed display / with data logger / display of average speed over the last 2 and 5 minutes
The Wind Speed Alarm / Wind Alarm Controller can be used in various fields of application. In use, the wind speed meter with cable and data logger 230 V starts measuring even the slightest wind movements. On the one hand, the wind speed meter can be used to monitor the current wind speed. On the other hand, it is also possible to use the wind speed meter with cable and data logger 230 V to measure average values for the last two or five minutes. If the wind speed values are higher than the pre-set values, a pre-alarm is activated before the alarm is triggered. Both alarms are emitted visually and audibly on the Wind Speed Alarm / Wind Alarm Controller. If the pre-alarm is activated, a yellow LED will flash on the front of the device and a beeper will emit a periodic warning tone. If the regular alarm needs to be activated, the red LED will flash and the device will beep continuously.
In general, the wind speed meter is used wherever wind monitoring is required. This is often the case in factories, mines, wind turbines and the like. If required, a relay can also be connected to the Wind Speed Alarm / Wind Alarm Controller. In addition to the low wind speeds, the wind speed meter is characterised by its high reliability and high accuracy.
Highlights
- 2 alarm types
- supply voltage: 230 V AC
- input signal: 4…20 mA
- communication: RS485
- 2 alarm relays installed
- integrated beeper for alarming
- sensor supply via evaluation unit
Technical specifications
- Speed — Measuring range: 0 … 50 m/s
- Speed — Resolution: 0.1 m/s
- Speed — Accuracy: ±0.3 m/s of range
- General technical data: Inputs 4 … 20 mA, Pulse
- General technical data: Outputs 4 … 20 mA, max. 250 V AC, 8 A, 15V DC
- Units m/s, km/h, mph — Display type: LCD
- Units m/s, km/h, mph — Display size: 3 Inch
- Units m/s, km/h, mph: Display resolution 128 x 64 pixels
- Storage medium Micro SD card, Internal memory — Storage capacity: 30000 Data records
- Storage medium Micro SD card, Internal memory: Memory capacity (additional information)External memory: max. capacity 32 GB (8 GB SD card included)
- Storage medium Micro SD card, Internal memory — Storage interval from: 10 s
- Storage medium Micro SD card, Internal memory — Storage interval to: 1 h
- Storage medium Micro SD card, Internal memory — Interface: RS485
- Storage medium Micro SD card, Internal memory — Sensor: supply 12 … 24 V DC / max. 150 mA
- Storage medium Micro SD card, Internal memory — Protection class (device): IP65
- Storage medium Micro SD card, Internal memory — Power supply AC 110 … 230 V: Hz 50 / 60
- Storage medium Micro SD card, Internal memory — Operating conditions: -20 … 70 °C , 0 … 95 % RH
- Storage medium Micro SD card, Internal memory — Storage conditions: -35 … 70 °C , 0 … 95 % RH
- Storage medium Micro SD card, Internal memory — Dimensions: ( L x W x H )150 x 160 x 93 mm
- Storage medium Micro SD card, Internal memory — Weight: 570 g
Delivery scope
- 1 x Wind Speed Alarm / Wind Alarm Controller PCE-WSAC 50+ 230
- 1 x 8 GB microSD card
- 1 x user manual
- 1 x sensor plug Note: Wind sensor not included! This must be ordered separately!
