Construction noise meterPCE-432-EKIT(Class 1)incl. outdoor noise level meter kit Handheld sound level meter / Octave band filter / A, B, C and Z rating filter upgradeable / Fast, Slow and Pulse Evaluation / Data logger / USB
The construction noise meter PCE-432 is used to measure the noise on building sites. This construction noise meter meets the requirements of class 1 sound level meters. In addition to the analysis of the construction noise in octave band or optionally in 1/3 octave band, the construction noise meter is able to determine the exact position of the sound level meter via GPS. The measuring range of the construction noise meter extends from 25 … 136 dbA at a construction noise frequency between 20 Hz and 12.5 kHz. The construction noise meter has various automatic measurement functions such as Leq, Lmax, Lmin, Lpeak … For frequency evaluation, the basis of evaluation A, B, C and Z are always available as standard for the construction noise meter. The display is able to show the measured values of the construction noise meter PCE-432 numerically with bargraphs or graphically.
The highlight of the construction noise meter PCE-432-EKIT is the outdoor accessory. The measuring device is thus delivered in such a way that it can be installed and operated permanently or temporarily outdoors, i.e. directly on construction sites. The construction noise measuring kit consists of a waterproof plastic case, a wind and rain protection for the Class 1 measuring microphone, additional batteries and a corresponding charger for the batteries. With the help of additional batteries, the construction noise meter can easily measure and record the noise for several days on a building site.
The stored measurement data can be analyzed and evaluated after the construction noise measurement via the supplied software or other spreadsheet programs.
Highlights
- 1/1 octave band included**
- 1/3 octave band optional
- Accuracy class 1
- Integrated GPS receiver**
- A, B, C & Z frequency rating
- Fast, Slow, Pulse and Peak time weighting
- Statistics function
- Display of the sound profile as a graph
- 3 measuring profiles adjustable
- Low inherent noise
- ICCP microphone 40 mV /PA
- Alarm level adjustable
Technical specifications
- Measuring range: 22 … 136 db(A)
- Accuracy: Class 1
- Frequency: range 3 Hz … 20 kHz
- Standards GB/T 3785.1-2010
- GB/T 3785.2-2010
- IEC 60651:1979
- IEC 60804:2000
- IEC 61672-1:2013
- ANSI S1.4-1983
- ANSI S1.43-1997
- Frequency: analysis 1/1 Octave band filter: 8 Hz … 16 kHz
- 1/3 Octave band filter: 6.3 Hz … 20 kHz
- Microphone 1/2″
- Microphone Class: 1
- Sensitivity: 40 mV/PA
- Frequency: range: 3 Hz … 20 kHz
- Connection: TNC — Power supply: : ICCP Standard
- Connection: TNC: Data-logging interval 1 s … 24 h (adjustable)
- Connection: TNC — Measuring functions: LXY (SPL), LXeq, LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN
- Y = Time weighting: F, S, I: N = Statistics in %: 1 … 99 %
- Y = Time weighting: F, S, I — Frequency: weightings A, B, C, Z
- Y = Time weighting: F, S, I: Time weightings Fast (F) 125ms, Slow (S) 1 sec, Impulse (I) 35 ms
- Y = Time weighting: F, S, I: Inherent noise Microphone: 19 db(A), 25 db(C), 31 db(Z)
- Y = Time weighting: F, S, I: Electronics: 13 db(A), 17 db(C), 24 db(Z)
- Y = Time weighting: F, S, I: AD converter 24 Bit
- Y = Time weighting: F, S, I: Sample rate Standard: 48 kHz
- Y = Time weighting: F, S, I: LN Mode: 20 ms
- Graphical: Display 160 x 160 pixel LCD with backlight
- Graphical: Memory 4 GB Micro SD card
- Graphical — Interface: USB (Memory readable via software or directly as mass storage)
- Graphical: RS-232
- Graphical: Voltage output AC 5V RMS
- Graphical: DC 10 mV/db
- GPSYes, GPS receiver for location determination — Power supply: 4 x 1.5 V AA Batteries
- GPSYes, GPS receiver for location determination: 12 V / 1 A Power plug
- GPSYes, GPS receiver for location determination: 5 V / 1 A USB
- GPSYes, GPS receiver for location determination — Battery: life Min. 10 h continuous use
- GPSYes, GPS receiver for location determination — Dimensions: 70 x 300 x 36 mm / 2.76 x 11.81 x 1.42″ (W x H x D)
- GPSYes, GPS receiver for location determination — Weight: Approx. 620 g / 1.4 lbs incl. batteries
Delivery scope
- 1 x Construction Noise Meter PCE-432-EKIT incl. Outdoor Noise Level Meter Kit
- 1 x 1/2″ measurement microphone class 1
- 1 x Wind noise suppression (foam ball)
- 1 x USB interface cable
- 1 x Software is a free download
- 1 x Power adapter
- 1 x Suitcase
- 1 x User manual
- 1 x Outdoor Noise Level Meter Kit PCE-4xx-EKIT
- 1 x Waterproof PELI transport case
- 1 x Wind and rain protection for microphone of the PCE-4xx series
- 1 x Charger for internal batteries
- 2 x 12 V lead gel batteries
- 1 x Tripod
- 1 x 2 m / 6ft 6″ microphone cable
- 1 x Connection cable for power supply (optional Schuko or US connection) Note: The outdoor construction noise meter PCE-432-EKIT comes with octave band filter. Optionally upgrade with a 1/3 octave band filter (see option)
