Itec KJS-6 Ozone Generator (Ozonator) Rental and Sales
The Itec KJS-6 ozone generator is a professional odor control and air disinfection device that offers very high performance. This ozonator is designed to eliminate odors in cars, apartments, hotels, and nursing homes, as well as to remove smoke or pet odors, and to address the aftermath of fires or water damage. Unpleasant odors are effectively and permanently eliminated thanks to the device’s exceptionally high ozone output. Blowing ozonated air into a room reduces odors and sterilizes the space. The device operates on a highly effective principle, resulting in immediately noticeable results.
During the oxidation process, certain types of odor molecules are burned and rendered harmless. The only byproduct of oxidation is oxygen. Ozone molecules are active in the air and can penetrate soft or porous materials such as fabrics and car interiors.
Air sterilization works on the same principle. Ozone molecules attack the cell walls of bacteria, mold, and viruses, effectively neutralizing them.
Effective odor control with no byproducts—an efficient ozone generator
Using corona discharge technology, the KJS-6 converts oxygen into ozone. Ozone is an unstable form of oxygen. These active molecules are unstable and seek out stable (odor) molecules, which they bind to and oxidize.
To remove mild odors from vehicles, a 15-minute ozone treatment is sufficient. For stronger odors in larger spaces, an 8-hour cyclic treatment is recommended. The device can sterilize the air in spaces up to 100 m³ and make it virtually odorless. It takes a maximum of 15 minutes to remove microorganisms from a vehicle’s interior.
Advantages of the Koroona Solution
- Long service life
- Very high performance
- Compact dimensions for use in many rooms or vehicles
- There is no need to constantly replace any parts
- Low energy consumption
- Ozone generation without byproducts or gas
- Complete odor removal without any residual odors
The Itec KJS-6 ozone generators were developed for professional use. The device must be used with care. No people or animals are allowed in the room where the device is in use. In addition, the room must be thoroughly ventilated after use so that the ozone can break down again. Please read the instructions carefully! If you have any questions, please contact us. Ozone may react with certain rubber materials.
The operating temperature must be above 10 degrees, and the relative humidity must be below 75%. Otherwise, the ozonation time will increase significantly, and the service life of the corona element will be shortened. Some natural rubbers may also react with ozone. Metals, wood, plastics, etc., do not oxidize because ozone does not penetrate deep into the material layers.
Ozonator Rental
To rent the device, click HERE.
| Weight | 6.30 kg |
|---|---|
| Dimensions | 280 x 220 x 330 mm (H x W x D) |
| Power consumption | 130 watts |
| Power Supply Voltage | 220–240 volts / 50 Hz |
| Warranty | 1 year |
| Ozone Formation | 5.62 PPM |
| Suitable for rooms up to | 100 m³ |
| Air volume | 104 m³ per hour |
Professional ozone meter with advanced climate measurement features
OZ-ONE – the name says it all: the first ozone measurement device that takes professional ozone measurement technology to a whole new level of affordability.
Regardless of whether it originates near the Earth’s surface naturally or through human activity, ozone in the outdoor air poses a significant health risk even at low concentrations. Compliance with safe ozone limit values is therefore not only necessary to protect health, but is also clearly regulated and mandated by law in many countries.
The OZ-ONE ozone meter is the ideal instrument for quickly and accurately monitoring ozone concentrations or for long-term recording of ozone levels in outdoor air.
The OZ-ONE is characterized by very low cross-sensitivity to other gases or volatile organic compounds, and it impresses with fast measurement results that are highly accurate, even at the lowest ozone concentrations.
Many integrated functions, such as ozone zero adjustment, the ability to measure reference values for short-term limit values and time-weighted average values, or the display of selectable units ranging from ppm to µg/m³, make the sensitive OZ-ONE an indispensable tool for accurately measuring ozone exposure.
In addition, this device is a compact, portable environmental measuring instrument that can be used to measure air temperature and humidity or to calculate the dew point and wet-bulb temperature. The device’s dual display always shows you two measured values at a glance.
For long-term measurements, the OZ-ONE can also be mounted on a tripod. In addition, the meter features a mini-USB port and a 9 V barrel jack, allowing it to operate continuously when powered by a battery via these connections. Last but not least, if necessary, you can connect a power bank to the OZ-ONE’s mini-USB port.
Benefits of an internship:
- Rapid and accurate measurement of even very low ozone concentrations
- Ozone measurement display in ppm or µg/m³
- Fast response time
- Low cross-sensitivity to volatile organic compounds
- Ozone Zero-Balance Function
- Measurement of Ozone Reference Values (STEL / TWA)
- Atmospheric pressure shift for high-precision standard cubic meter measurements
- Measuring Air Temperature and Humidity
- Calculating the Dew Point and the Temperature of a Moist Bulb
- Air Temperature and Humidity Offset Settings
- Data Hold, Min, Max, and Alarm Functions
- Screen Backlight
- ¼-inch thread for attaching a tripod
- In addition to battery power, a network connection is also available for continuous measurement
- Energy-saving automatic shut-off
- Including a calibration certificate
The OZ-ONE ozone meter offers you a wide range of applications:
- Workplace Measurements in Industry and Commerce
- Environmental Analysis
- Overview of Production Environments
- Monitoring of limit values following the use of ozone generators for odor neutralization or disinfection, for example, in the hotel industry, in drinking water treatment, and during restoration after fire and water damage
Technical Specifications:
- Measured value min./max. (ppm) | Ozone (O3) (ppm): 0–1
- Accuracy (ppm) | Ozone (O3) (ppm): <0.1 ppm: +/- 0.02 ppm or +/- 10% of the current measured value
- Measured value min./max. (µg/m³) | Ozone (O₃) (µg/m³): 0–1996 (at 20 °C and 1013 hPa)
- Accuracy (µg/m³) | Ozone (O₃) (µg/m³): <200 µg/m³: ±40 µg/m³ or ±10% of the current measured value
- Measurement Range (°C) min./max. | Air Temperature: 0–50
- Resolution (°C) | Air temperature: 0.1
- Accuracy (°C) ± | Air temperature: 0.6
- Measurement Range (°F) min./max. | Air Temperature: 32–122
- Resolution (°F) | Air temperature: 0.1
- Accuracy (°F) ± | Air temperature: 1.2
- Measurement range (%) min./max. | relative humidity: 0–99
- Resolution (%) | Relative humidity: 0.1
Accuracy | relative humidity (%):
- (± 5% RH (at 0% RH to 10% RH)); Accuracy (%): (5%)
- (± 3% RH (at 10% RH to 70% RH)); Accuracy (%): (3%)
- (± 5% RH (70% RH to 99.9% RH)); Accuracy (%): (5%)
- Dimensions (WxLxH) in millimeters: 290x110x80
- Weight in kilograms: 0.185
- Measuring device
- Batteries
- user manual
- Calibration Certificate
- Carry Bag
