Ideal Clima POLO Air Conditioner Without an Outdoor Unit – Modern Cooling Without an Outdoor Unit
A great air conditioner for your home if, for whatever reason, you’re not allowed to or can’t install an outdoor unit.
An elegant and quiet air conditioner for rooms where an outdoor unit cannot be installed
The Ideal Clima POLO is a modern air conditioner without an outdoor unit that provides efficient cooling and a comfortable indoor climate without the need for a traditional outdoor unit. The unit is ideal for apartments, offices, hotels, and historic buildings where installing an outdoor unit is not possible or permitted.
Installing standard split-system air conditioners can be complicated:
- in apartment buildings
- in buildings of environmental value
- in offices
- in rental properties
- in places where altering the exterior facade is prohibited
Ideal Clima POLO solves this problem with elegant monoblock technology, in which the entire system is housed within a single unit.
Why Choose Ideal Clima POLO?
- No external device required
- Suitable for apartments and historic buildings
- Cooling and Heating in a Single Unit
- Elegant horizontal design
- Controlling Wi-Fi with a Smartphone
- Quiet operation for everyday use
- Easier installation compared to a split system
- Automatic Air Valve
- Built-in condensate tank
- Removable air filter
- Durable metal construction
Problem: An air conditioner with an outdoor unit cannot be installed
In many buildings, it is not possible to use a standard split-system air conditioner because:
- The facade must not be altered
- The apartment association does not allow outdoor units
- Cannot be installed
- The outdoor unit detracts from the building’s appearance
- Installation becomes too expensive
At the same time, the summer heat can make living and working spaces uncomfortable and affect sleep, work performance, and the indoor climate.
Solution: Air conditioner without an outdoor unit
Ideal Clima POLO uses monoblock technology, in which the entire cooling system is housed within a single compact unit. Only two small air vents are visible on the exterior wall of the building.
The result is:
- a cleaner exterior appearance of the building
- easier installation
- lower installation costs
- less complex piping
- a modern and minimalist solution
Smart Control and Ease of Use
The Ideal Clima POLO air conditioner can be controlled:
- with the device’s touch buttons
- with a remote control
- via a smartphone
The digital control system allows you to conveniently adjust the temperature and operating modes as needed.
Quiet and suitable for everyday use
Unlike many portable air conditioners, the Ideal Clima POLO is designed for continuous use in homes and offices. Its quiet operation and elegant design make it ideal for:
- into the bedrooms
- living room
- to offices
- to hotels
- for smaller commercial spaces
Cooling and Heating in a Single Unit
In addition to cooling, the Ideal Clima POLO operates on the heat pump principle, allowing rooms to:
- to cool off in the summer
- to heat in the spring and fall
- maintain a stable indoor climate year-round
This makes the device a practical solution for Estonia’s changeable climate.
Durable, high-quality construction
The unit is constructed of sturdy aluminum sheet and powder-coated steel, which ensures:
- durability
- long service life
- modern look
- easier maintenance
Where is the Ideal Clima POLO outdoor unit used?
This device is well-suited for:
- into apartments
- private homes
- offices
- to hotels
- buildings undergoing renovation
- historic houses
- in areas where outdoor units are not permitted
FAQ – Frequently Asked Questions
What is a windowless air conditioner?
A window-type air conditioner is an air conditioning unit in which the entire system is housed inside a single unit and has no separate outdoor unit.
Does the Ideal Clima POLO require an outdoor unit?
No, the unit does not have a traditional outdoor unit. All that is needed are two air vents in the exterior wall.
Is this appliance suitable for an apartment?
Yes, the Ideal Clima POLO is very well suited for apartments and buildings where installing a split system is not possible.
Does the air conditioner also provide heat?
Yes, the unit also operates in heat pump mode and can be used to heat rooms.
Can the device be controlled with a phone?
Yes, the model supports control via a smartphone.
Is installation easier than with a split-system air conditioner?
Yes, installation is easier because there is no separate outdoor unit or refrigerant piping.
Is the Ideal Clima POLO suitable for a historic building?
Yes, a solution without external equipment is well-suited for buildings of environmental and historical value.
POLO Manual
Smart Detector R290
The Smart Detector R290 sensor allows you to comply with the requirements of standard CEI EN IEC 60335-2-40:2024+A1:2024 and install Polo in particularly restricted environments, as shown in the following table.
| Installation Type | M2 without sensor R290 | M2 with sensor R290 |
|---|---|---|
| On the ground | 135 | 7 |
| On the wall: ” > ” 1.80 m | 12 | 7 |
The sensor is calibrated to detect leaks of any refrigerant gas starting at a concentration of 500 ppm, which is 40 times lower than the flammable gas concentration defined in the R290 standard (LFL – lower flammability limit). In the event of a leak, the sensor’s LED flashes, emits an audible alarm at regular intervals, and activates a procedure to ensure the safety of the environment and the equipment: the compressor is shut off and the interior is ventilated at maximum speed for 5 minutes. A fan connected to the outside environment is activated cyclically to quickly remove any traces of refrigerant gas.
Installation Notes
- It is recommended to install the sensor in the lowest part of the Polo, such as on the underside.
- The sensor does not need to be recalibrated, as it calibrates itself.
Compliance
The POLO has been manufactured in accordance with the relevant European directives, specifically the following:
Wi-Fi connectivity compatible with SmartLife
| Description | POLO 8K BTU COOLING ONLY | POLO 10K BTU HP Inverter | POLO 12K BTU HP Inverter | ||
|---|---|---|---|---|---|
| Code | CPL 23 F | CPL 29 D | CPL 35 D | ||
| Cooling capacity (35°C–27°C) | (1) | BTU/h | 8000 | 10 000 | 12 000 |
| Log In | 2,350 | 2,930 | 3500 | ||
| Power Consumed for Cooling | (1) | Log In | 900 | 1,120 | 1,340 |
| Current absorbed for cooling | (1) | A | 4,0 | 5,0 | 6,0 |
| Compressor Type | / | / | IN-OUT | Inverter | Inverter |
| AU | (1) | In/In | 2,6 | 2,6 | 2,6 |
| Cooling Class | (2) | A | A | A | |
| Moisture-removal capacity | (1) | l/h | 0,8 | 1,0 | 1,2 |
| Heating capacity (7°C–20°C) |
(3) |
BTU/h | No | 9000 | 10 000 |
| Log In | No | 2,630 | 2,930 | ||
| Power Consumed for Heating
( PCOP) |
(3) | Log In | No | 730 | 815 |
| Current absorbed for heating | (3) | A | No | 3,3 | 4,0 |
| COP | / | In/In | No | 3,6 | 3,6 |
| Heating Class | (2) | / | No | A+ | A+ |
| Maximum indoor airflow velocity | m/h | 500 | 520 | 520 | |
| Enclosure Rating | IP20 | ||||
| Power Source | V/phase/Hz | 220–240 V/1/50 | |||
| Minimum internal sound pressure (ventilation only) | (4) | dB(A) | 27 | 28 | 29 |
| Maximum internal sound pressure (ventilation only) | (4) | dB(A) | 38 | 39 | 41 |
| Sound pressure in quiet mode | dB(A) | 39 | 39 | 40 | |
| Sound Power (EN 12102) LWA | dB(A) | 60 | 57,6 | 59,8 | |
| Condensate drain pipe | mm | 16 | |||
| Refrigerant | 290 randi | ||||
| Charging the Refrigerant | g | 280 | 290 | 290 | |
| Global Warming Potential (GWP) factor | 3 | ||||
| CO2 equivalent | t | 0.00084 | |||
| Net weight | kg | 40,5 | 42,5 | 43,5 | |
| Air Conditioner Dimensions | cm | 58x20x100 | 58x20x100 | 58x20x100 | |
| Packaging Dimensions | that | 66x33x112 | 66x33x112 | 66x33x112 | |
