This single fan air conditioner with Iarge volume air movement from 1,500 m³/hr to 3200 m ³ /hr is i deally suited to cool Iarge office areas, data centres and workspaces. The FACSW (6.7kW or 27.0 kW) split unit has been designed for a fast rental installation and start up.
FACSW is a freestanding unit and can cool specific areas by utilising the three speed fan outlet at front of the unit. Installation literally takes minutes and hoses are supplied in lengths of 5m, 10m, 20m and 30m.
This High-capacity portable air conditioning units, provided with an external unit can be positioned up to 30m away from the central body and equipped with the connecting pipes with glycol fast connection. The FACSW is designed using a self contained chilled water system. The water circulates through a water cooled condenser where the heat is absorbed and then is pumped through the water lines to the outdoor unit where the water is cooled.
The unit has an automatic thermostat, which requlates the local air temperature to the set level required and is capable of operating down to a temperature of 10°C.
Main characteristics
- Silent functioning
- Three fan speed
- Fittings for continuous draining pipe connection
- Rated average power consumption 2600 W
- Cooling capacity 6650 W
- Air flow 1500 mc/h
- Refrigerant R410a
- Weight 110 Kg
Characteristics
Frame
Structure with panels made of sturdy galvanized steel, painted with epoxy powder ensuring high resistance to atmospheric agents and aggressive environments. The panels are removable to allow a quick inspection and maintenance of the internal parts.
Compressor
Rotative compressor mounted on vibration dampers. Provided with resistance on the housing and thermal safety.
Refrigerant circuit
Evaporator and condenser: the coil is made of copper pipes and aluminium fins. Drying fi lter, Shrader valves, minimum and maximum pressure switch. Defrosting thermostat and solenoid valve in version S.
Condensate lifting pump
Pump installed inside the machine.
Fan
Centrifugal double suction fan, built with sturdy blades in galvanized sheet, statically and dynamically balanced. Protection degree: Three-speed fan.
Testing
Tests are performed to check the tightness of the refrigeration circuit. Electrical discharge tests and functional tests are performed as well.
Hot gas defrost
Enables to use the dehumidifier in environments with temperature up to 10°C. It is a special hot gas injection system to accelerate the defrosting of the ice formed in the evaporator.
Air filter
The air filter, supplied as standard with the unit, is washable and easily replaceable. It is in Polyurethane and High-efficiency filter.
Microprocessor
Controls the defrosting cycles, the compressor timer , temperature and the alarm card. The dehumidifier is equipped with step sequence control.
Control panel and electrical control panel
Located inside the machine. IP protection degree. Made in compliance with the European standards 73/23 and 89/336.
Ip
Standard IP21.
Technical standards
This dehumidifier meets the essential requirements included in the Directives of the European Community 2006/95/EC of 12 December 2006 on the safety of electrical products for use in Low Voltage; 2004/108/EC of 15 December 2004 in the field of electromagnetic compatibility; 2006/42/EC of 17 May 2006 in the fields of machinery safety. The conformity is declared with reference to the following harmonized technical standards: CEI-EN 60335-2-40, CEI-EN 55014-1, CEI-EN 55014-2. We also declare that the product is manufactured in compliance with the RoHS Directive in force, that is 2002/95/EC, transposed with the Legislative Decree of 25 July 2005 no. 151 (article 5).
