TTR 8200 Commercial Adsorption Dryer
The TTR 8200, like other TTR rotary dryers, is one of the most economical of its kind thanks to its heat recovery system—which is included as standard equipment—and electronic control of the dry air flow!
Its robust housing and technology developed in accordance with the highest industry standards make the TTR 8200 adsorption dryer a reliable partner for moisture removal, even under extremely harsh conditions.
Advantages of the dryer:
- High-quality, durable dehumidifiers “Made in Germany”
- High moisture removal performance even at low temperatures
- Reliable silica gel sorption rotors with a washable and mechanically very stable design
- With integrated heat recovery
- Electric Regenerative Heating System
TTR 8200 Standard Features at a Glance:
- Steel body, galvanized and painted
- Flowmatic Volume Flow Control
- Millennium Management Module
- Weather-resistant version
- Rotor Rotation Control (Rotor and Drive)
- Overheating protection system with a restart lock (regeneration air)
- Operating Temperature Control (Regeneration Air)
- Filter Monitoring (Airflow and Collective Warning Light)
- Duoventic Control*
- Configurable airflow direction adjustment (easy adjustment)
- External On/Off Connection Terminals
- Hygrostat connection terminals
- Potential-free contacts (operating, fault, filter)
Various Applications for the Dryer
The TTR 8200 adsorption dryer offers very high moisture removal capacity during continuous operation, even at low dew points. It is suitable for many applications, such as:
- Air pre-drying to maintain the pourability and flowability of hygroscopic products in storage, transport, and dosing systems
- Process Air Drying for Gas Turbines and Humidity Control in Gas Distribution Stations
- Keeping Freezing Tunnels and Deep-Freeze Warehouses Ice-Free
- Air drying or process air drying in the chemical and pharmaceutical industries, the electronics and semiconductor industries, or the food industry
- Preventing condensation, material degradation, or granule clumping during plastic processing
- Process Air Drying and Humidity Removal in the Steel Industry
- Air Drying and Dew Point Control in Cold Storage Facilities
- Air Drying in Water Treatment Facilities and Pumping Stations
- Air conditioning systems for ammunition depots or military supply stores
- Air Dehumidification and Dew Point Control in Clean and Dry Rooms
- Air conditioning in dry storage facilities or lumber yards
TTR 8200 Technical Specifications:
- Dehumidification capacity: 46.2 kg/h
- Dry air volume (nominal): 9,000 m³/h at 400 Pa
- Electrical connection: 3x 400 V / 50 Hz
- Regeneration air heater: 57 kW
- Max. power consumption: 64.5 kW
- Dimensions (W x L x H): 1750 x 1100 x 1700 mm
- Weight: 750 kg
- Dry air inlet/outlet connections: Ø 500 / 500 mm
- Regeneration air inlet/outlet connections: Ø 300 / 300 mm
Possible additional options:
- stainless steel housing
- humidity/temperature control
- Dew point sensor -80 °C … +20 °C
- Touchscreen for device operation
- GSM Remote Connection
- Remote Connection via Wi-Fi
- Heat Exchanger Module
- Steam Heater for Regenerative Air
- Gas-fired heater for regeneration air
- Electric Fan Heater for Dry Air
- HG 120 External Hygrostat
- HG 125 External Hygrostat
- Transport frame (stackable), with wheels
*With Duoventic, the power of each fan can be adjusted independently using a potentiometer; there is no need for gas levers on site
| Dry air (supply air at 20°C / 60% RH) | ||
|---|---|---|
| Moisture removal [kg/24h] | 1108.8 | |
| Moisture removal [kg/h] | 46.2 | |
| Airflow [m³/h] | 9,000 | |
| Nominal Air Volume [m³/h] | 8,200 | |
| External pressure [Pa] | 400 | |
| Connection inlet diameter Ø [mm] | 500 | |
| Connection port Ø [mm] | 500 | |
| regeneration air | ||
| Nominal Air Volume [m³/h] | 1660 | |
| External pressure [Pa] | 300 | |
| Connection Inlet Diameter Ø [mm] | 300 | |
| Connection port Ø [mm] | 300 | |
| operating principle | ||
| Operating Principle | TTR Trisorp Dual | |
| Workspace | ||
| Minimum temperature [°C] | -20 | |
| Maximum temperature [°C] | 40 | |
| Minimum relative humidity [% RH] | 0 | |
| Maximum humidity [% RH (non-condensing)] | 100 | |
| electrical values | ||
| Power connection | 380–480 V/50–60 Hz | |
| Rated Current [A] | 93.5 | |
| Installed capacity [kW] | 64.5 | |
| Heating capacity [kW] | 57 | |
| Recommended protection [A] | 125 | |
| electrical connection | ||
| terminal connection | ||
| automatic moisture removal | ||
| continuous moisture removal | ||
| dimension | ||
| Length (without packaging) [mm] | 1919 | |
| Width (without packaging) [mm] | 1,110 | |
| Height (without packaging) [mm] | 1680 | |
| weight | ||
| (without packaging) [kg] | 750 | |
| EQUIPMENT, FEATURES, AND FUNCTIONS | ||
|---|---|---|
| Housing type | ||
| Steel housing, galvanized and painted | ||
| Rotor Rotation Control (Rotor and Drive) | ||
| Overheating protection system with a restart lock (regeneration air) | ||
| Operating Temperature Control (Regeneration Air) | ||
| Filter Monitoring (Airflow and Collective Warning Light) | ||
| Dual-valve control | ||
| Configurable airflow direction adjustment (easy adjustment) | ||
| Terminals for external ON/OFF control | ||
| Hygrostat connection terminals | ||
| Potential-free contacts (operating, fault, filter) | ||
| hour meter | ||
| airflow control | ||
| with integrated heat recovery | ||
| Flowmatic Control with Sensor Support |
