Aerauliqa QRCE 1500A Central Ventilation Unit with Heat Recovery, 1550 m³/h
Features of the Aerauliqa QRCE 1500A fan with central heat recovery:
High-efficiency heat recovery fan for energy-efficient ventilation in offices, commercial buildings, and sports halls…
Its energy-efficient EC motor and ball bearings ensure long-lasting, maintenance-free, and quiet operation.
It features thermal and acoustic insulation made of non-flammable mineral wool, which ensures low noise levels and greater thermal efficiency.
This high-efficiency (>75%) static heat exchanger is made of aluminum plates, with additional sealing aluminum exchange plates, an integrated bypass system, an aluminum condensate collection tank, and a 1/2″ condensate drain connection.
The QRCE ventilation unit features electronic controls that enable the following:
- Manual ventilation control (% change in setpoint signal)
- automatic ventilation control (via a DPS sensor, supply air temperature, or ambient air quality)
- filter saturation indicator (with pressure switch or control range setting)
- automatic frost protection adjustment
- Modular control of the post-heating system (based on the comfort temperature setting)
- On/off (partial on/off) natural ventilation using a device (based on a comparison of outdoor air temperature and comfort temperature)
- Weekly programming with preset on/off times and associated temperature setpoints; quiet nighttime operation
- remote on/off switching
- Ventilation control with a digital fire alarm input
- Alert management by triggering active alerts or logging alert history
- BMS with Modbus protocol and RS-485 serial connection
Key features:
- automatic freeze protection adjustment;
- automatic ventilation control
- built-in physical detour
- digital interface
- filter saturation indicator
- remote on/off
- “freedom” mode
- Night mode (extra quiet).
- monitoring of total working hours
- Saving and Loading Settings
- Manual control of ventilation
- Post-heating module control
- Ventilation control with a digital fire alarm input
- Alert management, including activating active alerts or saving the alert history
- BMS with Modbus protocol and RS-785 serial connection
Advantages:
– Health and Hygiene:
- continuous and automatic air exchange
- Radon concentrations can be kept low
- Mold growth can be prevented
- air of optimal quality and composition
- low dust content
- allergen-free environment
– Convenience:
- a draft-free environment and smaller temperature fluctuations
- proper humidity
- An interior free of mosquitoes, flies, and other flying insects
- The level of noise seeping in from outside can be kept low
- an environment free of unpleasant odors
- automatic and extremely quiet operation
– savings:
- Energy savings thanks to a design featuring low-energy-consumption fans
- Heat recovery and energy savings, primarily during the heating season; however, during the summer season, cooling costs can be kept at a lower level
- In newly built houses, walls with a higher moisture content dry faster, and mold does not form
– Energy Certificate:
- Energy efficiency class A or A+
– Installation:
- Can be installed in both new and existing buildings and apartments
| Ventilation type | with heat recovery |
| Power (maximum) | 920 W |
| Diameter | 315 mm |
| Voltage | 230 V |
| Power | 920 W |
| Airflow | 1,550 m³/h |
| Noise Level | 54 dB(A) |
| Weight | 175 kg |
| Warranty | 1-year warranty |
