Robust Wind Measurement Device for permanent installation / 4 … 20 mA output /
for wind warning systems, building services and building automation
The Wind Measurement Device was developed to measure the wind direction in the industrial environment.This Wind Measurement Device can be connected to data loggers, process control systems, displays.A 4 … 20 mA signal is available as an output signal on the Wind Measurement Device.The Wind Measurement Device has no dead center in the north and measures the wind direction from 0 … 360 °.In order to protect the Wind Measurement Device from external weather influences, it is protected according to IP65.
In order to connect the Wind Measurement Device to an evaluation, a 65ft, 20 m cable is installed on the wind direction sensor.The Wind Measurement Device can be used for irrigation control, automation in greenhouses, on solar trackers, cable cars in ski areas, cranes, wind turbines, weather stations and wherever the wind or wind direction must be observed precisely.
Highlights
- Robust PA plastic housing
- IP 65 protection
- 4 … 20 mA output
- Long lifetime
- 0 … 360 ° measuring range
- Measurement from 2.62 ft/s, 0.8 m / s
Technical specifications
- Wind direction — Measuring range: 0 … 360 °
- Wind direction — Resolution: 25,5 °
- Wind direction — Accuracy: ±3°
- General technical data: Outputs 4 … 20 mA
- General technical data: Cable length 20 m
- General technical data: Maximum current 20 A
- General technical data: maximum wind speed 200 km/h
- General technical data — Protection class (device): IP65
- General technical data — Power supply: 12 … 30 V DC
- General technical data — Operating conditions: -20 … 60 °C , 0 … 95 % RH
- General technical data — Storage conditions: -35 … 80 °C , 0 … 95 % RH
- General technical data — Dimensions: ( L x W x H )130 x 65 x 185 mm
- General technical data — Weight: 170 g
Delivery scope
- 1 x Wind Measurer PCE-WV A
- 1 x instruction manual
