FS200 Fog and Smoke Simulator (fog machine and smoke machine)
Thanks to its smart, slim design made of durable, lightweight aluminum, the FS200 is easy to transport and gives you great freedom of movement even in tight spaces, such as fire escapes.
On site, the FS200’s patented canister holder can be unlocked and opened in just a few seconds.
This increases the footprint and provides greater stability even on challenging surfaces, such as flat roofs covered with gravel.
Both the FS200’s ultra-powerful turbine and its fluid pump can be infinitely adjusted in terms of their performance for mist delivery, allowing for much more precise adaptation to individual operating conditions.
In addition, the intelligent power coordination between the turbine, the heating element, and the pump ensures a consistently dense mist flow by the minute, without any interruptions caused by reheating, even at the turbine’s maximum power.
Smoke machine and fog machine
The FS200 has a pleasingly low fluid consumption, with a maximum of just 100 ml per minute.
Possible applications:
- Fire simulation, respiratory protection, and disaster response drills
- leak tests
- Detecting Leaks in a Flat Roof
- smoke evacuation drills
- Testing of Smoke Exhaust Systems
- Inspection of Outlet, Inlet, and Exhaust Air Openings
- Smoke Detection in Evacuation Routes
- Detecting Faulty Connections in Pipe Networks, Tanks, or Sewer Systems
- Finding Dams and Dam Cross-Sections
Here are a few practical benefits, in brief:
- Professional quality “made in Germany” — Original Troteci products
- Sturdy, lightweight aluminum construction—making it over 40% lighter than the previous model
- Extremely powerful blower turbine – continuously variable
- Significantly smaller dimensions compared to the previous model—ultra-compact and over 40% smaller
- A space-saving, all-in-one solution with a collapsible can holder
- Particularly dense white smoke due to the continuously variable fluid pump
- Easy to transport, even through narrow spaces such as fire escapes
- The intelligent power connection for the turbine, heating element, and pump ensures a continuous output of dense fog within minutes, without any interruptions caused by reheating.
- Service-friendly design – easy filter replacement in seconds
- German industrial design optimized for practical use
- The performance of the blower turbine and the liquid pump can be controlled in stages independently of each other and thus optimally adapted to individual operating conditions.
- The FS200 control panel is located under a protective cover with a magnetic latch that protects it from impacts
Firefighting and Disaster Response Drills
The smoke gas simulator is ideal for fire and disaster response drills—colored smoke cartridges and combustion chambers are available for use in drills upon request.
In addition, FS200 can be used to realistically visualize and test the functionality of smoke removal systems or smoke removal systems in evacuation routes within larger buildings or underground structures.
FS200 – Technical Details at a Glance:
- Maximum mist duration: approx. 210 s
- Fog period in the central and lower regions: persistent fog
- Steam generator power: 1500 W
- Turbine-powered blower: 1,600 W
- Max. power consumption: 3100 W
- Protection rating: IP54
- Airflow rate: approximately 68 l/s (245 m³/h)
- Fluid flow rate at maximum capacity: 100 ml/min
- Fluid flow rate with continuous mist: 30 ml/min
- Warm-up time: about 7 minutes
- Mains voltage: 230 V / 50 Hz
- Dimensions (W x L x H): 270 x 250 x 275 mm
- Weight (without the 5-liter fluid canister): 12.5 kg
The FS200 kit includes a 38 mm connector, a 5-liter canister of FluiTect fog concentrate, a filling hose with connectors, and a 5-meter fog hose (Tronect PV-A 38).
| fog | ||
|---|---|---|
| vacuum pressure [mbar] | 334 | |
| Airflow velocity [l/s] | 68 | |
| Airflow rate [m³/h] | 245 | |
| Fog duration at or below the average [s] | persistent fog | |
| Maximum fog duration [s] | about 270 | |
| generator unit | ||
| The principle of a generator | liquid evaporator | |
| Fluid consumption with continuous mist [ml/min] | 30 | |
| Fluid flow rate at maximum power [ml/min] | 100 | |
| Heating time: approximately [min] | 7 | |
| screen | ||
| There is no screen | ||
| Function LEDs | ||
| device control | ||
| buttons | ||
| residential design | ||
| metal | ||
| interfaces | ||
| Process connection – (Ø 50/38 mm) | ||
| Protection Level | ||
| IP54 | ||
| power source | ||
| Power connection | 230V/50Hz | |
| Maximum power consumption [W] | 3100 | |
| Vaporizer power [W] | 1500 | |
| Turbine-powered blower [W] | 1,600 | |
| dimension | ||
| Length (without packaging) [mm] | 310 | |
| Width (without packaging) [mm] | 253 | |
| Height (without packaging) [mm] | 465 | |
| Weight | ||
| (without packaging) [kg] | 14 | |
| STANDARD SCOPE OF DELIVERY | ||
|---|---|---|
| Standard Scope of Delivery | ||
| generator | ||
| Mist Hose (5 m, plastic, Ø 38 mm) | ||
| Adapter for reducing the diameter of a turbine nozzle from Ø 50 to Ø 38 mm | ||
| Fluid hose with connector | ||
| 5 liters of fog fluid in a canister | ||
| user manual | ||
| filling tube | None | |
| MEASURABLE QUANTITIES AND FUNCTIONS | ||
|---|---|---|
| Features and Equipment | ||
| Turbine for discharge connection, Ø 50/38 mm | ||
| Variable capacity of a liquid feed pump | ||
| variable turbine power | ||
As one of the leading international manufacturers of air treatment solutions, Trotec offers industrial and commercial customers innovative products for air purification, humidification, heating, air conditioning, and ventilation. Our high-performance equipment is backed by 100% German research, development, design, and manufacturing. All in the name of the highest quality standards, well-thought-out system solutions, and fresh ideas.
