Biemmedue Sally 160/9 M Professional Hot Water Pressure Washer, 160 bar, 540 l/h, 2800 rpm

Biemmedue Sally 160/9 M – Professional Hot Water Pressure Washer, 160 bar

The Biemmedue Sally 160/9 M is a professional hot-water pressure washer from Biemmedue , featuring an operating pressure of 160 bar and a flow rate of 540 l/h at 2,800 rpm. This Biemmedue Sally hot water pressure washer is equipped with a TRIPLEX piston pump featuring ceramic pistons and a brass head. The 160-bar Sally pressure washer has a 230V single-phase connection and is equipped with an excellent boiler that allows the water to reach a maximum temperature of 65 °C. The diesel tank capacity is 20 L.

FUNCTIONAL SPECIFICATIONS

Axial pump

The Biemmedue Sally 160/9 M is a professional pressure washer equipped with a thermally protected 2,800 rpm motor and new-generation, high-efficiency, long-life pumps. The Biemmedue Sally 160/9 M is equipped with a TRIPLEX-type pump featuring ceramic pistons and a brass-tipped rod.
The pump motor and burner motor are independent, and there is also an on/off switch for the pump-boiler unit.

Higher boiler efficiency

This Sally 160/9 M hot water pressure washer is equipped with a high-performance double-coil boiler, which ensures high performance and heats the outlet water to a temperature of 65 °C. This 160-bar professional pressure washer has a thermostat that regulates the water temperature.

Simplicity of Movement

Thanks to its two large rear wheels and a front wheel that turns with the front brake, the Biemmedue Sally 160/9 M can be transported practically anywhere and is easy to maneuver even in tight spaces.
The reinforced metal base protects the Biemmedue professional pressure washer from impacts and ensures its durability over time.
The tank is made of impact-resistant plastic and holds up to 20 liters of diesel fuel.

Delayed System (TSD)

The 15 0 -bar hot water pressure washer is equipped with a delayed full-shutdown system (TSD), an electromechanical safety valve system that triggers a complete shutdown of the machine approximately 15 seconds after the Biemmedue Sally Professional Pressure trigger is released. The pressure washer gun is deactivated and reactivates when the trigger is pulled again. This prevents the pump from overheating, extending its service life and reducing wear and tear.

TECHNICAL SPECIFICATIONS

This professional hot-water boiler pressure washer features a water flow rate of 540 l/h and a pressure of 160 bar. The pump features ceramic pistons and a brass Conrod, along with thermal protection for the motor in case of overheating.
The motor has a power input of 2.8 kW at 2,800 rpm. The power supply is 230 V, single-phase, 50 Hz.
The Biemmedue Sally 160/9 M can reach a maximum temperature of 65°C and is equipped with a 20-liter diesel fuel tank.

The Biemmedue Sally 160 bar weighs 75 kg and measures 85 x 48 x 86 cm.

APPLICATIONS

The Biemmedue Sally 160/9 M is a hot-water pressure washer with a boiler, designed for professional use.

FEATURES

• A piston pump with ceramic pistons and a brass head
• Total Stop Delayed (TSD)
• Separate pump motor and burner motor
• High-efficiency water heater with two coils
• Motor Thermal Protection
• On/Off Switch for the Pump Water Heater
• Water Temperature Control Thermostat
• Swivel front wheel with brake
• Reinforced metal base
• Impact-resistant plastic tank
• Hose reel adapter ( optional, must be ordered separately )