Vertigo 18 kW Diesel Cabinet Heater
- High-efficiency heat exchanger
- 35-liter fuel tank with a fuel gauge
- Stainless steel outlet pipe, l = 0.6 m
- Combustion chamber preheating and automatic post-ventilation
- To use the summer-winter switch as a fan
- The option to reuse air when the heating unit is located outside the premises (bar, restaurant, etc.)
- Air Inlet/Outlet Grilles
- Can be moved on swivel casters
- Easy maintenance
18 kW heating capacity: excellent performance for heating a variety of small and medium-sized indoor spaces, including workshops, warehouses, showrooms, garages, industrial facilities, and much more.
100% clean warm air: Vertigo circulates only clean, smoke-free warm air, as the fumes produced during combustion are vented through a flue.
Slim and compact design: fits easily into many spaces, even when space is limited.
Built-in thermostat: Allows you to set the desired room temperature within the range of +5° to +30° C. The heating turns on and off automatically as needed to maintain the desired temperature, saving fuel, energy, and money.
High-quality design: features an integrated oil burner, electronic flame control, a helical fan, an oil filter, a highly efficient stainless steel heat exchanger, and a steel combustion chamber. To ensure maximum efficiency and reliability, the combustion chamber is preheated and automatically ventilated after use.
Plug & Play: Any business owner can easily install it. All you need to do is drill a hole in the wall to vent the exhaust gases, and then plug it into a standard electrical outlet.
35-liter fuel tank: The integrated diesel fuel tank can be easily refilled as needed.
Retractable wheels: The built-in wheels make it easy to position and install the Vertigo.
Summer/Winter Switch: Allows the fan to be used separately without heating to ensure ventilation during the summer months.
Duct Kit Available: A standard 120 mm diameter duct kit is available for the Vertigo roof vent, allowing the duct to be routed through the roof. The standard flue kit includes two 1-meter flue sections, a rain cap, and a 90-degree elbow. Additional flue sections are also available, allowing you to configure a longer exhaust run if necessary. (The heater also comes with a wind guard and a horizontal transition pipe.)
Rated heat output: 18.2 kW / 15,652 – 62,295 kcal/h – BTU/h
Heat output: 16.9 kW / 14,556 – 57,934 kcal/h – BTU/h
Thermal efficiency: 93%
Airflow: 1,750 m³/h
Fuel consumption: 1.44 kg:. /h
Tank capacity: 35 liters
Electrical specifications: 230-1-50 V-ph-Hz
Power consumption at 230 V: 400 watts
Temperature rise: 60°C at 20°C
Dimensions (width x depth x height): 370 mm x 553 mm x 1,996 mm
Weight: 70 kg
Exhaust pipe diameter: 120 mm
1 x Vertigo cabinet heater
The Vertigo flue kit includes:
2 x 1 m flue
1 x rain cap
1 x 90-degree elbow
NOTE: The heater comes with a wind guard and a horizontal cross pipe.
