SPLIT-E - Industrial Electric Hot Water Generator

Categories:

Made entirely of 304 stainless steel
A current switch at the input for controlling the ignition of the resistors, installed vertically so that the spring can be removed in the event of a spring failure.
Safety Valve
Adjustable thermostat, 0–90 °C
A fixed 70°C thermostat with automatic reset for double safety, located at the water inlet of the first resistor (if the circuit breaker fails and the heating elements overheat due to a lack of water, it intervenes immediately).
QE Low-Voltage 24V User-Controlled
Main Power Switch
ON/OFF buttons to start and stop the heating mode
Half-power selection (50%–100%) for models with 6 resistors (all except the 24 kW model)
A 5-second delay between the flow of water and the activation of the resistors (to prevent damage to the contactors caused by excessive timer cycles due to microleaks or improper use of the nozzle)
Insulated resistors

SPLIT-E – INDUSTRIAL ELECTRIC HOT WATER GENERATOR WITH CONTINUOUS FLOW FOR HIGH-PRESSURE APPLICATIONS

Made entirely of 304 stainless steel
A current switch at the input for controlling the ignition of the resistors, installed vertically so that the spring can be removed in the event of a spring failure.
Safety Valve
Adjustable thermostat, 0–90 °C
A fixed 70°C thermostat with automatic reset for double safety, located at the water inlet of the first resistor (if the circuit breaker fails and the heating elements overheat due to a lack of water, it intervenes immediately).
QE Low-Voltage 24V User-Controlled
Main Power Switch
ON/OFF buttons to start and stop the heating mode
Half-power selection (50%–100%) for models with 6 resistors (all except the 24 kW model)
A 5-second delay between the flow of water and the activation of the resistors (to prevent damage to the contactors caused by excessive timer cycles due to microleaks or improper use of the nozzle)
Insulated resistors