SALLY – PPREMIUM HIGH-PRESSURE HOT WATER CLEANER
Made in Italy
Biemmedue Sally 150/8 M – Professional Hot Water Pressure Washer, 150 bar
The Biemmedue Sally 150/8 M is a professional hot-water pressure washer from Biemmedue , featuring an operating pressure of 150 bar and a flow rate of 480 l/h at 2,800 rpm. This Biemmedue Sally hot water pressure washer is equipped with an AXIAL-axis pump with steel pistons.
The Sally 150 bar pressure washer has a 230V single-phase connection and is equipped with an excellent boiler that allows the water to reach a maximum temperature of 65 °C. The diesel tank capacity is 20 L.
FUNCTIONAL SPECIFICATIONS
Axial pump
The Biemmedue Sally 150/8 M is a professional pressure washer equipped with a thermally protected 2,800 rpm motor and new-generation, high-efficiency, long-life pumps. The Biemmedue Sally 150/8 M is equipped with an axial pump featuring AXIAL-type steel pistons .
The pump motor and burner motor are independent, and there is also an on/off switch for the pump-boiler unit.
Higher boiler efficiency
This Sally 150/8 M hot water pressure washer is equipped with a high-performance double-coil boiler, which ensures high performance and heats the outlet water to a temperature of 65 °C. This 150-bar professional pressure washer has a thermostat that regulates the water temperature.
Simplicity of Movement
Thanks to its two large rear wheels and a front wheel that turns with the front brake, the Biemmedue Sally 150/8 M can be transported practically anywhere and is easy to maneuver even in tight spaces.
The reinforced metal base protects the Biemmedue professional pressure washer from impacts and ensures its durability over time.
The tank is made of impact-resistant plastic and holds up to 20 liters of diesel fuel.
Total Stop System
The 150-bar hot water pressure washer is equipped with the Direct Total Stop (TS) system, an electromechanical safety valve system that controls the machine’s complete start-up or shutdown by pressing or releasing the trigger on theBiemmedue Sally Professional gun. Pressure washer. This prevents the pump from overheating, extending its service life and reducing energy consumption.
TECHNICAL SPECIFICATIONS
This professional hot-water boiler pressure washer features a water flow rate of 480 l/h and a pressure of 150 bar. The pump is an axial-type steel-piston pump with thermal protection for the motor in case of overheating.
The motor speed is 2,800 rpm and the power consumption is 2.6 kW. The power supply is 230 V, single-phase, 50 Hz.
The Biemmedue Sally 150/8 M can reach a maximum temperature of 65 °C and is equipped with a 20-liter diesel fuel tank.
The Biemmedue Sally 150 bar weighs 70 kg and measures 85 x 48 x 86 cm.
APPLICATIONS
The Biemmedue Sally 150/8 M is a hot-water pressure washer with a boiler, designed for professional use.
FEATURES
- Axial pump with steel pistons
- Immediate complete stop
- Separate pump motor and burner motor
- High-efficiency water heater with two coils
- Motor Thermal Protection
- On/Off Switch for the Pump Water Heater
- Water Temperature Control Thermostat
- Swivel front wheel with brake
- Reinforced metal base
- Impact-resistant plastic tank
ENDOWMENT FUND
- Half-barrel water pistol (M22, excluding the M22)
- Stainless steel pipe, 50 cm (inlet M22, outlet 1/4″ F)
- 1/4” nozzle M 2503
- High-Pressure Hose, 8 m – 1/4″ R1 M22
- Whipped cream
- 1/2″ quick-connect hose fitting
- Filter
- Service Key
TECHNICAL SPECIFICATIONS
| Max pressure | 150 bar |
| Maximum capacity | 480 l/h |
| Pump | Axial |
| Headless system | TS |
| Pump Speed | 2,800 revolutions per minute |
| Power Consumed | 2.6 kW |
| Power Source | 230 V |
| Tank capacity | 20 L |
| Maximum temperature | 65 °C |
| Dimensions | 85 x 48 x 86 cm |
| Weight | 70 kg |
| Hose Reel | No (optional) |
High-Pressure Washer Sales by Pro Air OÜ – from
Biemeedue’s machine design projects are developed using CAD-CAM systems and tested in a laboratory equipped with sophisticated testing equipment, based on criteria of functionality, performance, and safety. During production, high-quality standards are ensured through continuous innovation in manufacturing and assembly processes. In addition, special attention is paid to the selection of material and component suppliers, which, in accordance with our company policy, are preferably “Made in Italy.” Strict control points are implemented from the receipt of materials and components through every stage of production, up to the final quality control and 100% testing of our manufactured products. Compliance with safety standards—based on the latest and most stringent European safety requirements—is ensured through testing and certification by quality standards institutions and international standards organizations such as KIWA, CSA-UL, EAC, TYSK, etc.
