DIESEL-POWERED HEATER IDE 100 D 100KW
Whether you want to reliably keep construction site areas warm, heat large hall areas efficiently, safely protect your livestock from the cold, or keep your materials ice-free despite extreme cold—the IDE 100 D offers 100 kW of direct heating capacity.
The oil burner built into this heater can be flexibly fueled with diesel or heating oil, with a high-quality Danfoss® injection pump regulating the continuous fuel supply to the stainless steel combustion chamber. Safe operation of the oil heater is ensured by an electronic flame safety device and integrated overheating protection.
In addition, other advantages of the device include an easily accessible external fuel filter and a convenient way to check the amount of fuel remaining using the level indicator integrated into the tank.
In the case of the IDE 100 D, the temperature is controlled via an integrated thermostat with a digital dual display showing the setpoint and the actual value. An optional 25-meter connection cable for an external thermostat is also available if the oil heater’s fan needs to be installed away from the heating zone.
Of course, the IDE 100 D oil heater fan is also ideally equipped for outdoor heating — its smooth-running cart design, complete with cable connectors and a built-in fuel tank, along with a durable, double-coated housing, makes the oil heater fan both mobile and weatherproof.
The tank capacity is designed so that the IDE 100 D can easily be used for an entire workday without refueling. Using the optionally available adapter kit, the unit can also be easily connected to an external oil tank for continuous heating.
Practical benefits:
- A particularly economical solution for standard oil heating
- Integrated fuel tank with a fuel level indicator
- Electronic flame protection
- Overheating Protection
- Stainless steel combustion chamber
- Danfoss® injection pump
- Comes standard with a fuel filter
- Integrated thermostat with two displays for actual and setpoint values
- Connection for an external thermostat
- Chassis with cable holder for easy repositioning
Some technical details about the IDE 100 D:
- Heating type: direct heating
- Air volume: 1,300 m³/h
- Nominal heat output: 100 kW (85,984 kcal/h)
- Temperature increase ∆T: 350 °C
- Mains voltage: 220–240 V / 50 Hz
- Plug: CEE 7/4
- Cable length: 1.15 m
- Current consumption: 2.7 A.
- Power consumption: 650 kW
- Maximum hourly fuel consumption: 9.5 l
- Thermostat: built-in
- Fuel supply: compressor
- Sound level (at a distance of 1 m): 80 dB (A)
- Tank capacity: 69 l
- Dimensions (W x L x H): 582 x 1210 x 718 mm
- Weight: 41 kg
| How It Works | ||
|---|---|---|
| Heating type: direct | ||
| oil | ||
| Indirect heating type | – | |
| Air volume | ||
| Max. flow rate [m³/h] | 1,300 | |
| fan | ||
| axial | + | |
| radial | ||
| Nominal heat output | ||
| Max. stage power [kW] | 100 | |
| Max Level [kcal] | 85.984 | |
| Rise in temperature | ||
| Maximum temperature [°C] | 350 | |
| Electrical Values | ||
| Power Connection | 220–240 V / 50 Hz | |
| Current Consumption [A] | 2.7 | |
| Power consumption [kW] | 0.43 | |
| Heating capacity [kW] | 100 | |
| Electrical Connection | ||
| Connection | CEE 7/4 (Schuko plug, type F) | |
| Cable length [m] | 1.15 | |
| service | ||
| internal thermostat | ||
| Connecting an External Thermostat | ||
| Overheating Protection | ||
| Fuel Supply | ||
| Fuel Supply | Danfoss pump | |
| Oil Consumption | ||
| Max. flow rate [l/h] | 9.5 | |
| Tank capacity | ||
| Content location [l] | 69 | |
| Sound Values | ||
| Distance 1 m [dB (A)] | 80 | |
| Fuels Used | ||
| Heating Oil EU | ||
| diesel | ||
| Petroleum | ||
| dimension | ||
| Length (without packaging) [mm] | 1210 | |
| Width (without packaging) [mm] | 582 | |
| Height (without packaging) [mm] | 718 | |
| Weight | ||
| (without packaging) [kg] | 41 | |
| EQUIPMENT, FEATURES, AND FUNCTIONS | ||
|---|---|---|
| mobility | ||
| Plastic transport rollers | ||
| Legs | ||
| Carrying/transport handle(s) | ||
| Housing Design | ||
| metal | ||
