Ingredients:<\/strong> propane, hydrogen peroxide, didecyldimethylammonium chloride<\/p>\n MAXOX-DF is supplied as a ready-to-use solution and is applied using a pulse jet, mist, or thermal sprayer. Use 1 liter per 1,000 m\u00b3 of volume for odor neutralization and 1 liter per 100\u2013200 m\u00b3 of volume for disinfection. <\/p>\n Be sure to read the safety data sheet and technical data sheet before use!<\/p>\n Listed with the Federal Institute for Occupational Safety and Health, registration number: N-70797. WARNING! Causes severe skin irritation and serious eye damage. Keep out of reach of children. If medical assistance is needed, have the product packaging or label ready. Wear protective gloves\/protective clothing\/eye protection\/face protection. Do not breathe in mist\/vapors\/aerosols. IF ON SKIN (or hair): Immediately remove all contaminated clothing. Rinse skin with water or take a shower. Keep locked up. Take the contents or container to an authorized waste disposal facility or municipal collection point. <\/p>\n Heylo, a disinfectant and odor remover manufactured by Alron: for professional fire and water damage cleanup products.<\/p>\n Note<\/strong>: Be sure to read the safety data sheet and technical data sheet before use!<\/p>\n Are your active ingredients intended solely for disinfection?<\/strong> Do your active ingredients eliminate viruses?<\/strong> Can Heylo oxidizing agents be used to disinfect hands?<\/strong> Have your active ingredients been approved for treating mold?<\/strong> Can MAXOX-DF be diluted or thinned?<\/strong> What is the difference between PENETROX and MAXOX-DF?<\/strong> How can insulation layers be disinfected with Foggen?<\/strong> Can we spray vehicles, rooms, etc., with PENETROX without hesitation and use them again after a short while? Or do we need to cover upholstery, floors, etc., beforehand and then wipe them down completely afterward (also considering the bleaching effect)? Can we therefore disinfect our employees\u2019 vehicles in a very short amount of time? Can we also disinfect our offices? <\/strong> Should any residue caused by condensation (on floors, etc.) be wiped away with MAXOX-DF, or can the rooms simply be used again after adequate ventilation?<\/strong>
\nUse and Dosage of Maxox-DF<\/h4>\n
\n![\"Notice:\"](\"https:\/\/www.hws-trade.de\/wp-content\/uploads\/2021\/06\/icons8-info-96.png\")
<\/div>\n<\/div>\n<\/div>\nNOTICE:<\/h5>\n
\nUse biocides with caution. Always read the label and product information before use. Hazardous goods: UN 3107.
\nBest before 24 months after the date of manufacture. <\/p>\n<\/div>\n<\/div>\n
\n![\"Warning!\"](\"https:\/\/www.hws-trade.de\/wp-content\/uploads\/2014\/10\/GHS05_80px.png\")
<\/div>\n<\/div>\n<\/div>\nWARNING!<\/h5>\n
Frequently Asked Questions (FAQ) on Disinfection<\/h3>\n
\nNo. They can be used for disinfection, odor neutralization, and mold removal. <\/p>\n
\nYes. All Heylo disinfectants have limited virucidal activity. <\/p>\n
\nNo. These products are not intended for use on humans or animals. <\/p>\n
\nYes. All biocidal products must be approved by the BAUA (Federal Institute for Occupational Safety and Health). <\/p>\n
\nNo, MAXOX-DF is a ready-to-use product that must not be mixed with other substances!<\/p>\n
\nPENETROX and MAXOX-DF have nearly identical compositions. PENETROX is suitable for surface treatment, while MAXOX-DF is intended for large spaces. PENETROX can be applied with a brush, spray bottle, or ULV sprayer. MAXOX-DF, on the other hand, can only be applied using a thermal or pulse-jet fogger. <\/p>\n
\nYou can apply the MAXOX-DF active agent to insulation layers using a fogger. However, the fogger does not provide compression, so a side-channel compressor is required to deliver the fog to the object. The mist is so fine that, for example, in the case of a floating leveling layer, you can monitor the mist output at the edges or through vent holes. Of course, there is a residual risk, since you cannot see inside the object. <\/p>\n
\nWe recommend fogging your vehicles and business premises with MAXOX-DF and treating relevant surfaces, such as door handles, counters, or tables, with ALRON CITROX or PENETROX. With MAXOX-DF, there is no need to worry about bleaching. PENETROX cannot be applied via fogging; use only an ULV sprayer or the manual application (wiping with a cloth) method. The risk of bleaching on textiles cannot be ruled out. Bleaching is less likely to occur when wiping with a cloth, as the surfaces are wiped down again, preventing high concentrations from remaining on the object. <\/p>\n
\nAs a rule, MAXOX-DF does not need to be wiped off, and there is no risk of bleaching. If applied in excess, the product may cause slight staining on surfaces, but this will dissipate after a short time. <\/p>\n